Millenia S 17's on an FC hub? spacer issue
#1
Full Member
Thread Starter
iTrader: (5)
Join Date: Oct 2009
Location: Davenport IA
Posts: 61
Likes: 0
Received 0 Likes
on
0 Posts
Millenia S 17's on an FC hub? spacer issue
Ok guys so I picked up a set of factory millenia S wheels , this style- http://media.ed.edmunds-media.com/pi...44-300x189.jpg17x7 with a 67.1mm hub bore, similar to the FD wheels. I am looking to run a 25mm spacer on all four corners to get these to fit nicely. Here is the problem I'm having....
I am wanting to buy these spacers -
http://www.ebay.com/itm/SILVER-BILLE...ht_1161wt_1396
How are you supposed to use these when the holes for the factory lugs are not drilled through? I cant understand how they would secure to the factory hub..... most other spacers have the holes drilled through so you can bolt the factory lugs on therefore securing the spacer to the hub, and then the wheel bolts to the spacer....
these are the only decent priced spacer that fits the FC so im really set on these if they work somehow?
what am I missing here??
thanks in advance!!
I am wanting to buy these spacers -
http://www.ebay.com/itm/SILVER-BILLE...ht_1161wt_1396
How are you supposed to use these when the holes for the factory lugs are not drilled through? I cant understand how they would secure to the factory hub..... most other spacers have the holes drilled through so you can bolt the factory lugs on therefore securing the spacer to the hub, and then the wheel bolts to the spacer....
these are the only decent priced spacer that fits the FC so im really set on these if they work somehow?
what am I missing here??
thanks in advance!!
#3
Full Member
Thread Starter
iTrader: (5)
Join Date: Oct 2009
Location: Davenport IA
Posts: 61
Likes: 0
Received 0 Likes
on
0 Posts
thank you for the reply!
Thread
Thread Starter
Forum
Replies
Last Post
rgordon1979
3rd Generation Specific (1993-2002)
40
03-15-22 12:04 PM