kinda odd question
Senior Member
Joined: Aug 2001
Posts: 446
Likes: 1
From: Helena, Al
It depends on the width of the wheel. The measurement you have is call backspacing.
Subtract half the wheel width from your backspacing and that is your offset.
IE. (width / 2) - backspacing = offset.
Generally offset is measured in mm so you will have to convert your wheel width and backspacing from inches to mm.
Subtract half the wheel width from your backspacing and that is your offset.
IE. (width / 2) - backspacing = offset.
Generally offset is measured in mm so you will have to convert your wheel width and backspacing from inches to mm.
Thread
Thread Starter
Forum
Replies
Last Post
Adaptronic S5 Turbo PNP Unit questions
_Tones_
Adaptronic Engine Mgmt - AUS
10
May 25, 2021 05:37 AM
Nosferatu
2nd Generation Specific (1986-1992)
7
Sep 5, 2015 02:13 PM