How to tell dead LSD
#1
Full Member
Thread Starter
Join Date: Jan 2003
Location: Central NJ
Posts: 63
Likes: 0
Received 0 Likes
on
0 Posts
How to tell dead LSD
How can I tell if my LSD need rebuild? This is a 87 T2, so I am guessing I have the plate type LSD which will wear down in times. The car has 125k miles and mainly use on track...
#5
Former Rx7 *****
Join Date: Nov 2001
Location: Mississauga
Posts: 4,534
Likes: 0
Received 0 Likes
on
0 Posts
you can't tell by jacking the car up... you can't generate enough torque on teh wheels to cause the discs to show slipping (IE Wear)
go find a road in the middle of nowhere with a gravel/sand shoulder.
stick 1/2 the car on the sand/gravel and the other 1/2 on teh pavement.
Have a friend watch from outside the car... rev the car in 1st gear and launch it at like 4000+ rpms and have your friend watch.
btw hang onto steering wheel tight!
u should know prettyu qucikly if your rear end if fubar
go find a road in the middle of nowhere with a gravel/sand shoulder.
stick 1/2 the car on the sand/gravel and the other 1/2 on teh pavement.
Have a friend watch from outside the car... rev the car in 1st gear and launch it at like 4000+ rpms and have your friend watch.
btw hang onto steering wheel tight!
u should know prettyu qucikly if your rear end if fubar
Thread
Thread Starter
Forum
Replies
Last Post