How Big can i go?
04-11-09, 10:53 AM
#1
Full Member
Thread Starter
iTrader: (1)
Join Date: Dec 2006
Location: ILLINOIS
Posts: 164
Likes: 0
Received 0 Likes
on
0 Posts
How Big can i go?
how big of a spacer can you get away with before you have to buy bolt on or extend your lugs?
Front
Size: 17x7.5
Offset: +30mm
Rear
Size: 17x8.0
Offset: +33mm
wana be pretty flush with the fender. i can roll and pull some because i dont have it painted yet.
Front
Size: 17x7.5
Offset: +30mm
Rear
Size: 17x8.0
Offset: +33mm
wana be pretty flush with the fender. i can roll and pull some because i dont have it painted yet.
04-12-09, 09:24 PM
#3
Lives on the Forum
It depends on the wheel, to be safe you need at least 8 FULL turns of the lug nut.
To figure it out you could always count how many turns you can get without spacers, then subtract 8 and multiply by 1.5 to get the maximum spacer thickness in mm.
To figure it out you could always count how many turns you can get without spacers, then subtract 8 and multiply by 1.5 to get the maximum spacer thickness in mm.
Thread
Thread Starter
Forum
Replies
Last Post
FC3S Timmy
2nd Generation Specific (1986-1992)
8
10-02-15 08:08 AM