HKS drift suspension problem?
#1
Full Member
Thread Starter
Join Date: Dec 2006
Location: Kuwait
Posts: 200
Likes: 0
Received 0 Likes
on
0 Posts
HKS drift suspension problem?
Hi
lock at this picture , what is the problem in the adjust parts(violet color)?
Uploaded with ImageShack.us
my FD came from JAPAN like this ? but all picture I saw before told me it is wrong ,
lock at this picture , what is the problem in the adjust parts(violet color)?
Uploaded with ImageShack.us
my FD came from JAPAN like this ? but all picture I saw before told me it is wrong ,
#2
Rotary Enthusiast
Hi there, looks like you have the same coilovers as me.
You are correct - that spacer bit should be in between the two large nut things...
Looks like you should disassemble them to get the spacer piece in the correct place...you will need a set of spring compressors...
I just adjusted my coilovers last nite (made it about 10mm higher, 80mm rite height was a little too low!)
You are correct - that spacer bit should be in between the two large nut things...
Looks like you should disassemble them to get the spacer piece in the correct place...you will need a set of spring compressors...
I just adjusted my coilovers last nite (made it about 10mm higher, 80mm rite height was a little too low!)
Thread
Thread Starter
Forum
Replies
Last Post