I'm looking into purchasing a set of used Volk 3s.. This is off of a '95 Supra. The wheels in question are 18 by 9 with 45 offset for the front and 18 by 10 with a 44 offset. I know the back will fit just fine, not sure about the fronts. Will I need to use a 5mm spacer? I'm trying to void any type of spacer.

The tires on the wheels are P7000 summer in 235-40 and the back are 275-35 or was it 40s?

I sure hope the center bore is the right size.

 

The front can't get any better than that really. You've got it made. Especially since we can't get that wheel anymore. From what I understand it's been discontinued.

The offsets are great for the front and rear. You have my blessing.

If running a 245/35 up front, use the 285/30 rear.

If running a 255/35, use 275/35 for the rear.

Good luck, Rishie

Centerbore won't matter as they use hubcentric rings. The supra is a 60mm and FD is a 67mm. therefore you just need to pick up some new hubrings. I will call and see if I can find some however it will be difficult.

I'll call around and post back tommorrow. I'll get you some metal ones.

Thanks, Rishie