FC wheel size finalization
#1
RX7less **(
Thread Starter
iTrader: (6)
Join Date: Dec 2003
Location: Novi Michigan
Posts: 6,916
Likes: 0
Received 0 Likes
on
0 Posts
FC wheel size finalization
Well, ive pretty much narrowed my wheels sizes down to 2 setups. Im planning to get either 17x7 w/ a 35mm offset in front with 17x8 in the rear with a 25mm or a 35mm offset. or 17x8's all around with a 25mm offset. Im going to be doing mostly drifting and some auto cross. Which setup should be best for what im going for? thanks -alex
#3
Rotary Freak
Join Date: Apr 2004
Location: Rochester, NY
Posts: 1,579
Likes: 0
Received 0 Likes
on
0 Posts
you might look into 16 wheels.... 7" up front running a 225 tire and 8" out back with a 265 tire.
for autox, the smaller wheels will be lighter (probably) and the potential is there to run a smaller diameter tire to get even better gearing, in essence more power to the ground. not to mention the 16"ers will be cheaper for wheels and for tires... you could then afford to step up to a better tire
for autox, the smaller wheels will be lighter (probably) and the potential is there to run a smaller diameter tire to get even better gearing, in essence more power to the ground. not to mention the 16"ers will be cheaper for wheels and for tires... you could then afford to step up to a better tire
Thread
Thread Starter
Forum
Replies
Last Post
Frisky Arab
2nd Generation Specific (1986-1992)
13
08-18-15 05:30 PM
KAL797
Test Area 51
0
08-11-15 03:47 PM