FB rack and pinion conversion help
01-13-15, 02:20 PM
#1
Junior Member
Thread Starter
Join Date: May 2013
Location: Los Angeles
Posts: 31
Likes: 0
Received 0 Likes
on
0 Posts
FB rack and pinion conversion help
What's up everyone I knows there's probably a thread out there covering this but I wanted to see if there's better ways to do this. How I can use an FC rack and pinion on my FB. I heard RE-Speed makes a kit but I can't find anything on their website. Any help would be appreciated.
01-13-15, 05:49 PM
#2
RE-speed is no longer in business, and there is no other company that I know of that makes an aftermarket rack and pinion conversion kit. If you search the 1st gen section, there are a few members that have adapted a 2nd gen subframe and rack to fit their 1st gen.
This is a recent thread with good info:
https://www.rx7club.com/1st-generati...ughts-1075439/
This is a recent thread with good info:
https://www.rx7club.com/1st-generati...ughts-1075439/
01-13-15, 07:34 PM
#3
Junior Member
Thread Starter
Join Date: May 2013
Location: Los Angeles
Posts: 31
Likes: 0
Received 0 Likes
on
0 Posts
RE-speed is no longer in business, and there is no other company that I know of that makes an aftermarket rack and pinion conversion kit. If you search the 1st gen section, there are a few members that have adapted a 2nd gen subframe and rack to fit their 1st gen.
This is a recent thread with good info:
https://www.rx7club.com/1st-generati...ughts-1075439/
This is a recent thread with good info:
https://www.rx7club.com/1st-generati...ughts-1075439/
Thread
Thread Starter
Forum
Replies
Last Post
joel(PA)
Group Buy & Product Dev. FD RX-7
8
10-04-15 06:07 PM
joel(PA)
Race Car Tech
0
10-01-15 10:25 AM