Enkei RP01 Color Match Needed
Thread Starter
Joined: Feb 2001
Posts: 7,943
Likes: 133
From: In A Disfunctional World
Enkei RP01 Color Match Needed
Just got a set of used Enkei RP01s, 9x17. I need a paint color match to touch up a few scratch spots. Any suggestions?
Hey Chuck,
Try out Enkei's US offices www.enkei.com . Might consider a complete refinishing - like powdercoating, as it's generally less expensive then painting (if you don't go to place that knows how big the auto customizing ind is, hehe), and more chip resistant to boot.
One of the Cincy RX7 guys that comes down to Houston a lot has a place that will do it for $25 per wheel - though I think that's a Cincy RX7 club hookup.
Try out Enkei's US offices www.enkei.com . Might consider a complete refinishing - like powdercoating, as it's generally less expensive then painting (if you don't go to place that knows how big the auto customizing ind is, hehe), and more chip resistant to boot.
One of the Cincy RX7 guys that comes down to Houston a lot has a place that will do it for $25 per wheel - though I think that's a Cincy RX7 club hookup.
Thread Starter
Joined: Feb 2001
Posts: 7,943
Likes: 133
From: In A Disfunctional World
Daniel,
I called Enkei and talked to them. They do not offer any usefull post sells help. All I got was DOH, FIND IT YOURSELF, and DO IT YOURSELF.
I called Enkei and talked to them. They do not offer any usefull post sells help. All I got was DOH, FIND IT YOURSELF, and DO IT YOURSELF.
Then I reccommend repainting all of them or just going for powdercoating. Powder would be the best and cheapest. You will need to look into a different color though.
Rishie
Rishie
