Drifting Suspension
03-10-05, 10:06 PM
#2
First fix any broken or worn items.
Here is my suggestion for mods and in this order:
1. Polyuerthane bushing kit ( With a 19 year car, I am sure yours are shot.)
2. DTSS Eliminators
3. Rear Camber adjuster
4. Front and rear strut bars
5. SuperNow! Super angle kit (increases steering angle 7 degrees, and removes bumpsteer)
6. LSD (Clutch type, if you do not have one)
7. Sway Bars/endlinks (should be done last since they tend to complament the previous mods)
You want to lower the rear of the car with your flex's. If you do not have much power then run Front 2 degrees camber, no toe; Rear no toe, and no camber. Once you get more power you can start to increase the rear camber and add a slight bit of toe.
Here is my suggestion for mods and in this order:
1. Polyuerthane bushing kit ( With a 19 year car, I am sure yours are shot.)
2. DTSS Eliminators
3. Rear Camber adjuster
4. Front and rear strut bars
5. SuperNow! Super angle kit (increases steering angle 7 degrees, and removes bumpsteer)
6. LSD (Clutch type, if you do not have one)
7. Sway Bars/endlinks (should be done last since they tend to complament the previous mods)
You want to lower the rear of the car with your flex's. If you do not have much power then run Front 2 degrees camber, no toe; Rear no toe, and no camber. Once you get more power you can start to increase the rear camber and add a slight bit of toe.
03-11-05, 07:44 AM
#3
Lives on the Forum
Originally Posted by str84wardchuck
I own 86 FC, dropping in 13BT, already got the Tein Flex Suspension System, any suggestions of what else I would need?
-Ted
03-15-05, 01:05 PM
#4
Full Member
Thread Starter
iTrader: (1)
Join Date: Aug 2004
Location: Camarillo
Posts: 129
Likes: 0
Received 0 Likes
on
0 Posts
haha, yeah true that, i'm getting a JDM 13BT, but need the wiring harness,.
I read some posts, i think you could used the NA harness and do some wiring job and make it work.
I read some posts, i think you could used the NA harness and do some wiring job and make it work.
Thread
Thread Starter
Forum
Replies
Last Post