Suspension/Wheels/Tires/Brakes

Control Arms

Thread Tools
 
Search this Thread
 
Old Sep 30, 2004 | 12:15 PM
  #1  
cretinx's Avatar
Thread Starter
Rotard
Tenured Member 10 Years
 
Joined: Sep 2004
Posts: 64
Likes: 0
From: Rochester, NY
Question Control Arms

I'm getting some nasty squeeking from the front, though there's no play in the steering.

I was told it was the control arms, and that they're about $450/side from the factory.

Has anybody installed them on their own? If so, how hard is it? I have the full shop manual, a little mechanical experience, and I live with a guy who built Honda drag cars for 7 years drives a 9 second daily driver civic, so he's offered to help.

We don't have a lift, but we have jacks, jackstands etc . . . (and a few B18 blocks and LS Integra trannies liying around . . . )
Reply
Old Sep 30, 2004 | 09:41 PM
  #2  
oneflytrini's Avatar
Stabbed by a pen
Tenured Member 15 Years
iTrader: (1)
 
Joined: Mar 2002
Posts: 2,035
Likes: 2
From: Tamarac, Florida
Its pretty easy. If I can do it, anyone can. Just make sure to put the alignment plates back on. Its a pretty straight foreward removal and install. Make sure you also disconnect the caliper from the hub assembly so that you dont rip the brakelines, and remove the abs sensors.

ALI
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
MattGold
3rd Generation Specific (1993-2002)
3
Sep 9, 2015 02:20 PM




All times are GMT -5. The time now is 10:38 AM.