Coilovers??? Tell Me What You Guys Think
#1
Senior Member
Thread Starter
Join Date: Jan 2002
Location: winnipeg, manitoba
Posts: 400
Likes: 0
Received 0 Likes
on
0 Posts
Coilovers??? Tell Me What You Guys Think
Well i found some Coilovers for cheep, but my guess they are probably cheap quility too, but do you guys think i should stay with stock or get a set of these bad boys..... thanks alot
99 BUCKS FOR 4... CAN'T BEAT THAT
http://truckn-store.com/product.asp?3=1022
99 BUCKS FOR 4... CAN'T BEAT THAT
http://truckn-store.com/product.asp?3=1022
#2
Lives on the Forum
There are no shocks with that setup, just the springs and perches...
Springs must be matched the shocks, and vice versa...
I dunno...sounds like it's for the show-only set...nothing wrong with that, just don't be surprised if they don't perform well at competition/performance driving...
IMO, I wouldn't get them...
There's no way around the expense of well thought-out spring/shock system...You're paying for more than just the hardware...you're paying for the hours of testing that the tuner went through before releasing the product.
Springs must be matched the shocks, and vice versa...
I dunno...sounds like it's for the show-only set...nothing wrong with that, just don't be surprised if they don't perform well at competition/performance driving...
IMO, I wouldn't get them...
There's no way around the expense of well thought-out spring/shock system...You're paying for more than just the hardware...you're paying for the hours of testing that the tuner went through before releasing the product.
#3
Full Member
Join Date: Sep 2001
Location: Orange County, CA
Posts: 209
Likes: 0
Received 0 Likes
on
0 Posts
if those are similar spring rates to the M2 springs (that cost about $600 i think), then would there be any other difference? Isnt spring rate the only main difference in springs?
I am considering the M2 coilover spring set, but $600 seems really high for what it is.
why do we have to pay more for the same products than the rest of the world? I think that performance manufacturers are just screwing us because we are a niche market and everybody is scared of the rx-7 cause it is a rotary.
I am considering the M2 coilover spring set, but $600 seems really high for what it is.
why do we have to pay more for the same products than the rest of the world? I think that performance manufacturers are just screwing us because we are a niche market and everybody is scared of the rx-7 cause it is a rotary.
Thread
Thread Starter
Forum
Replies
Last Post