serbRX7

iTrader: (9)

any one got pic of 5zigen rims and FEED fenders...i am planing to lower my car...and if i do it with stock fenders tires will rub...so i am looking to see how car would look...
with feed fenders or maybe rolled fender....i got 17x10+35 255/40 in front

HalfSpec

iTrader: (14)

There are a few people running 17x10 + 35 and 255/40 all the way around in this thread:
https://www.rx7club.com/suspension-wheels-tires-brakes-20/5zigen-fn01-rcs-fd-621010/
The rears should clear with little or no roll. The front needs a flat roll and a liner trim to fit lowered.

Those are the exact wheel and tire specs I'm going to be running and I'm hoping to get by with fender rolling and a liner trim.

Lane

serbRX7

iTrader: (9)

on the stock hight you wont have much problems...if you lower the car it will rub bad...
thats whey i am looking for some pic with wide front fenders and 17x10+35 in front and i couldn't find any... i have seen that thread...and searched all over....

Battle Cat

iTrader: (78)

well it all depends how low the fd is, and tire size.. i had a 17x9.5 +12 on a 235/40/17

and cleared with a fender roll on the front. and it was dumped to the ground.

hope this helps..

HalfSpec

iTrader: (14)

Not saying your wrong, but their are people running 255's on lowered fronts with 17x10 +35 wheels on rolled fenders without issues:

http://i12.photobucket.com/albums/a2...d/CIMG2190.jpg
http://i12.photobucket.com/albums/a2...d/CIMG2191.jpg
https://www.rx7club.com/showpost.php...5&postcount=76

https://www.rx7club.com/showpost.php...&postcount=174
https://www.rx7club.com/showpost.php...&postcount=176

And those are just the first two I found.

I guess anything becomes a problem if you keep lowering though. Maybe your idea of lowering is a lot different than mine

Lane

serbRX7

iTrader: (9)

ok one down....

i did see that black car with rolled front fenders, look ok...

would love to see some with FEED front fenders...