I own a 93 fd and i need to know will 285/35/18 fit on a 18x10 with a 52mm offset at all four corners.

 

God no...

 

probably going to have issues with the trailing arm. i have 285/30/18 on 18x10's with 38mm offset. they fit good, but the fenders had to be rolled. also, that's on the rear. no way in hell on the front without a widebody and lots of work

 

I think you missed the 52mm offset part.. Hes lucky if he can even get the studs into the wheel before they will be hitting the strut.

 

i saw that. that's why i mentioned the control arms. with certain coilovers, there's quite a bit more clearance there, but the front would not be happening

 

285/30/18 on 18x10 +51-52ish all four corners will work, as long as you have coilovers (which is needed up front, but not neccesary in the rear. Of course, if you have them up front, you'd obviously put them in the rear too). Should not need aftermarket trailing arms.

Please spend a bit more effort searching next time:

https://www.rx7club.com/showthread.p...l+four+corners

https://www.rx7club.com/showthread.p...l+four+corners

https://www.rx7club.com/showthread.p...l+four+corners

https://www.rx7club.com/showthread.p...l+four+corners

https://www.rx7club.com/showthread.p...l+four+corners

and a blast from the past (I can't even remember posting this )

https://www.rx7club.com/showthread.p...l+four+corners