would these work on my fc ( i have 30mm overfenders )

I looked through the wheel fitment thread but I couldn't figure it out.

thanks!

 

woops.

here ya go


http://cgi.ebay.com/ebaymotors/15x8-...19070104QQrdZ1

 

Do you have 30mm up front?

If so then yes this will fit just fine. You can run a pretty decent tire. Make sure your fender is really 30mm wider.

If in the rear it will be sunken in pretty good. You'll need spacers to make it look right.

Everything else seems fine. PCD is ok, Centerbore i'm sure is fine if these are for a light truck.

Rishie

 

I must say those look pretty damn sick.

I guess the only other variable would be brake caliper clearance.

Rishie

 

they also make these in a 15x10, w/ a -44

how would that work?

If I got the
15x8 -19 for the front
and
15x10 -44 for the back,

would that look alright?

would I fill the extra 30mm I have in the back?

thanx guys!

 

That would be way too low.

Rishie

 

so the 15x8 -19 would be ok?