Alright Post your Rims PICS
#27
...94% correct.
Originally Posted by GnawD87
heres my speedline mesh wheels off of a crown victoria (i think.)
16 x 7 +25 w/ 205/55/16 kumho rubber
16 x 7 +25 w/ 205/55/16 kumho rubber
#29
Junior Member
Join Date: Apr 2005
Location: san diego
Posts: 29
Likes: 0
Received 0 Likes
on
0 Posts
#38
Lives on the Forum
Originally Posted by J-Rat
Why all the hate on 3 spokes?
The Advan SA-3's are OLD SCHOOL rims, and they actually look nice on an FC (lines).
You get the thumbs up from all us OLD SCHOOL guys...
-Ted
Last edited by RETed; 09-22-05 at 10:13 PM.
#48
Lives on the Forum
Originally Posted by Makenzie71
bah...just different center-caps..
lol
lol
The SA-3's are 2-piece with a spun outer lip; the Mustang stock rims are cast 1-piece.
The SA-3's have bolts on the outside center section; I don't see no damn bolts on the Mustang rims.
-Ted
#49
Passing life by
Originally Posted by RETed
Are you blind or something?
The SA-3's are 2-piece with a spun outer lip; the Mustang stock rims are cast 1-piece.
The SA-3's have bolts on the outside center section; I don't see no damn bolts on the Mustang rims.
-Ted
The SA-3's are 2-piece with a spun outer lip; the Mustang stock rims are cast 1-piece.
The SA-3's have bolts on the outside center section; I don't see no damn bolts on the Mustang rims.
-Ted
#50
...94% correct.
Originally Posted by RETed
Are you blind or something?
The SA-3's are 2-piece with a spun outer lip; the Mustang stock rims are cast 1-piece.
The SA-3's have bolts on the outside center section; I don't see no damn bolts on the Mustang rims.
-Ted
The SA-3's are 2-piece with a spun outer lip; the Mustang stock rims are cast 1-piece.
The SA-3's have bolts on the outside center section; I don't see no damn bolts on the Mustang rims.
-Ted
Second, not all Advan's are multi-piece:
Third, Advans look like mustang wheels...or vice versa. Denying the resemblence is petty and kind of lame.
There's been a number of threads about fitting mustang wheels...most that look nice...and the poster gets bashed because "they're mustang rims". I figured I'd point out that little bit of hypocracy here.
At any rate...here's what I started with...
14X8 Supra p-Types
then some prime 14X9 rims, I'll have to find pics, can't find an online example..
My next project will have these, but they'll be black: