Alignment question
#1
rawr
Thread Starter
iTrader: (2)
Join Date: Feb 2001
Location: Silver City, NM
Posts: 2,331
Likes: 0
Received 0 Likes
on
0 Posts
Alignment question
going to get my car aligned on tuesday, i need info
what should i get the toe set to for front/rear
i have 16x7" wheels with 225/55 on rear and 205/55 on front, stock suspension.
can someone help me thanks
what should i get the toe set to for front/rear
i have 16x7" wheels with 225/55 on rear and 205/55 on front, stock suspension.
can someone help me thanks
#3
Formula Mazda Driver
Join Date: Feb 2001
Location: Portland, Oregon, USA
Posts: 680
Likes: 0
Received 0 Likes
on
0 Posts
most alignment shops will just set your alignment to spec as specificied in a FSM. I doubt they will let you specify your own settings. But if they do...
If you auto-x a lot, you might want a little toe out up front, like 1/16", or 1/32", otherwise 0 or 1/16 toe-in is probably about standard. You problaby want 0 in the rear. Its nice to have camber caster plates up front so you can run more negative camber when you do spirited driving, or auto-x's, track sessions etc....for Auto-x you can go -2.5 degrees no problem, although on the street that will wear your tires VERY unevenly.
If you auto-x a lot, you might want a little toe out up front, like 1/16", or 1/32", otherwise 0 or 1/16 toe-in is probably about standard. You problaby want 0 in the rear. Its nice to have camber caster plates up front so you can run more negative camber when you do spirited driving, or auto-x's, track sessions etc....for Auto-x you can go -2.5 degrees no problem, although on the street that will wear your tires VERY unevenly.
Thread
Thread Starter
Forum
Replies
Last Post
Nosferatu
2nd Generation Specific (1986-1992)
7
09-05-15 02:13 PM