929 master cylinder?
11-02-01, 03:59 PM
#1
Rotary Enthusiast
Thread Starter
929 master cylinder?
what year 929 master cylinder do i use?
anything else i need to know about this mood other than the brake line on the opposite side?
anything else i need to know about this mood other than the brake line on the opposite side?
11-02-01, 07:50 PM
#2
Full Member
iTrader: (2)
Join Date: Apr 2001
Location: Rochester Hills, MI
Posts: 241
Likes: 0
Received 0 Likes
on
0 Posts
I did this on my 3rd gen, not sure if it is the same for a second gen. You need a master from a 93+ 929, you will have to use the resevoir off your old MC. I bought a pre-fabbed line from the local autoparts store that was a 10" or 12" 3/8 metric brake line, worked perfect just bent it by hand (not the best way to do it, but it worked ok). I bought mine from Malloy Mazda, they usually have the best prices unless you get Mazdacomp, or you could try Jeff Haas Mazda. I think it was around $120, but I'm not really sure. Malloy # is 888-533-3400, ask for Ray Crowe.
Nick
Nick
11-02-01, 09:23 PM
#3
On a long vacation
Join Date: Feb 2001
Location: Bay Area, CA, U.S.A.
Posts: 2,160
Likes: 0
Received 0 Likes
on
0 Posts
Re: 929 master cylinder?
Originally posted by Crusader_9x
what year 929 master cylinder do i use?
anything else i need to know about this mood other than the brake line on the opposite side?
what year 929 master cylinder do i use?
anything else i need to know about this mood other than the brake line on the opposite side?
