Perry9394

iTrader: (2)

did u roll ur fenders to fit them? and wat size of tires are u running?

karl0003

iTrader: (7)

i didnt roll my fenders and the tires are 235's in the front and 255's in the rear. the profile on both of them are 40's. hope that helps out a bit

Perry9394

iTrader: (2)

Finally got my set of FN01R-C Hot, 17x9JJ +35 and 17x10JJ +35, 255/40/R17 RT615 all round, they do not rub at all with my current ride height, and if i drop it any more the front tires may rub the plastic fender liners, if i could choose again i will use 275/40/R17 for the rear.

before:

After:

Front wheel at turn:

Rear wheel fitment:

staticguitar313

iTrader: (2)

I'd like to see more pics of the 17x10" all around

gnictry

iTrader: (10)

okay from reading i think i should get 17x10 5zigen fn01r-c bronze color for all four with 255/40 front tire and 275/40 back.

I am lowered with Koni adj to lowest perch with R1 springs=1" lower than stock i think.

question is what offset? think i need +25 rear and +35 front?

also would i need to roll?

what offset would i not have to roll?

TheAsset

iTrader: (11)

17x9

Battle Cat

iTrader: (78)

needs more concave

staticguitar313

iTrader: (2)

yeah wants to see more 10 wides, they're the only deep concave FN's

staticguitar313

iTrader: (2)

dame doublepost

93_fd

hi i was wondering if anyone is knows if i can run fn01s in a 17x10 all around with 255/40/17s. i have espelir springs that lower it 35mm(1.3 inches) and i have feed front fenders. sorry for not searching but i didnt want to look through all of these pages.

93_fd

anyone have pictures of polished fn01s on a car? 5zigen doesnt have anymore silver till march, but has every other color in a 17x10 +25

Miata_mx5

If you have rolled fenders you can do it.

dregg100

iTrader: (34)

yikes, should have stuck with the RP03's.

AzNvJaI

rims are kinda common but they are nice

93_fd

anyone ran 17x10 +12 with feed fronts and no flare, just a lip roll in the back?

Battle Cat

iTrader: (78)

your gonna need more the lip roll on the rear

ihad 17x10 +18 and it stuck out a good amount

NoPis10

iTrader: (29)

reviving the DEAD...

Anyone have pics of the 17x10 in Silver ??
Seems everyone has the Bronze.. would like to see some Silver one's on FD's

Thanks

93_fd

polished, 17x10 +25. i didnt like these in pictures but they look really good i person. 5zigen was out of silver in +25 till march when i ordered mine. i know it needs to be lowered more, still looking for coilovers if anyone has some.

mp5

iTrader: (3)

Yes crappy cell phone pics but you get the picture,just a little fender roll was required in the rear running a 17x10 35 offset with a 275/40/17 Nitto NT01








My 18 inch setup

Deerod021

is there any 18" wheels that you know of that offer the upgrade of performance???

Josh18_2k

iTrader: (3)

RPF1's. they come in 18x9.5 +38 or +45 and 18x10 +38

BlinD26

iTrader: (27)

Hoping I can get some recommendations on fitment.. I happened to find a member's setup (jbust) over @ rimtuck.com that was running on stock fenders/no roll...

IMO it looks like it sits just about perfect and is the look I want to achieve.

His wheel specs are:
Front: 17 x 8 +35 - 235/45/17
Back: 17 x 10 +35 - 255/40/17







Personally, I'd like to run a bit more meat up front/rear because I am planning on doing some auto-x and moving up from there.

Any thoughts/suggestions?

ARD T2

iTrader: (22)

A better fitment for "grip" would be:

17x9 +43 with 255/40/17
17x10 +35 with 255/40 or 275/40

However I still believe you need to roll the rear fenders depending on your camber settings.

Rishie

BlinD26

iTrader: (27)

PM sent.

Slideways.FD

iTrader: (6)

i just got my new 5zigen in.
17x10 + 35 all 4.
running 255/40/17's and no rub on rear had to roll the front's.
pics soon