ok I ALREADY KNOW ABOUT THE SIZING THREAD!! I CANT open it because my Excel is messed up. I need to know if 265/35/18 will fit on the front of my fd with a 9in rim and a +42 offset?

Thanks Ken

 

Ken,
it'll be tight, but not impossible. I run a 255/35 on the same rim.... it will rub the liner at full lock a little, and you'll want rolled fenders.

 

do you rub with your 255?

 

I run a 255 on a 9" +42. It is a pretty good fit, but you'll eventually catch the fender lip pulling into a steep driveway, et al. It's always a good idea to roll the front fenders.
Like ptrhahn said, a 265 can be made to work, but it will be tight on that wheel/offset. Aside from being wider, it's also a little taller then stock.

 

It rubs the liner in front, behind the washer bottles when the wheels are turned at full lock, but honesly, most all aftermarket wheels do.

 

ok well then i guess im not gonna go with the khumo MX then since they jusp from 245 to 265, back to the drawing board