Suspension/Wheels/Tires/Brakes

17x9 +22 all around fc

Thread Tools
 
Search this Thread
 
Old Feb 27, 2014 | 01:26 AM
  #1  
GrossPolluter's Avatar
Thread Starter
Rotary Enthusiast
iTrader: (1)
 
Joined: Feb 2012
Posts: 1,075
Likes: 2
From: CA
17x9 +22 all around fc

I'm getting 17x9 gram lights and I have the option of 22 or 38 offset, I have the shine wider fenders and gc camber plates. After reading fc3s pro, I'm thinking 22 would be ok for front, but rear is cutting it close. Advise?
Reply
Old Feb 27, 2014 | 02:53 PM
  #2  
MaczPayne's Avatar
Mac Attack
Tenured Member 15 Years
iTrader: (5)
 
Joined: Dec 2005
Posts: 5,668
Likes: 22
From: California
Go with 22. You'll clear the front suspension if you're running coilovers. Rears would require a roll and small flare depending on how much camber you run.

Might need a spacer up front if you're using OE style springs which change size near the strut top.
Reply
Old Feb 27, 2014 | 08:42 PM
  #3  
GrossPolluter's Avatar
Thread Starter
Rotary Enthusiast
iTrader: (1)
 
Joined: Feb 2012
Posts: 1,075
Likes: 2
From: CA
Originally Posted by MaczPayne
Go with 22. You'll clear the front suspension if you're running coilovers. Rears would require a roll and small flare depending on how much camber you run.

Might need a spacer up front if you're using OE style springs which change size near the strut top.
I have gc adjustable springs. I'm hoping to track my car with minimal rubbing. how much camber are you talking about in the rear?
Reply
Old Mar 5, 2014 | 12:12 AM
  #4  
MaczPayne's Avatar
Mac Attack
Tenured Member 15 Years
iTrader: (5)
 
Joined: Dec 2005
Posts: 5,668
Likes: 22
From: California
I ran about -1 - 1.5 in the rear. Maxed out the individual camber adjusters, pretty much!
Reply




All times are GMT -5. The time now is 03:00 PM.