17 x J11 Offset
#1
Water Injection Specialist
Thread Starter
Join Date: Apr 2003
Location: UK
Posts: 479
Likes: 0
Received 0 Likes
on
0 Posts
17 x J11 Offset
I currently have 3 peace 17x J10 on the rear of my car with a offset of 20 if I have worked it out correctly, these wheels stick out of the arch by about 1inch which isent a problem at this time, now what I want to do is change the back of the rim for one that is an inch bigger making the overall wheel a 17 x J11 with a offset of 19.5.
The way I have worked this out is by measuring the overall width of the rim which would be 305mm / by 2 to get the centre line, and minuses the T dimension which is the measurement from the back of the bolt on face to the outside of the inner rim. Have I worked out the offset correctly and if so can someone tell me if its gona rub on my trailing arms. I want to run 315/35/17 if thats of any help.
Thankfully Erdin
The way I have worked this out is by measuring the overall width of the rim which would be 305mm / by 2 to get the centre line, and minuses the T dimension which is the measurement from the back of the bolt on face to the outside of the inner rim. Have I worked out the offset correctly and if so can someone tell me if its gona rub on my trailing arms. I want to run 315/35/17 if thats of any help.
Thankfully Erdin
#3
Water Injection Specialist
Thread Starter
Join Date: Apr 2003
Location: UK
Posts: 479
Likes: 0
Received 0 Likes
on
0 Posts
Rynberg,
Thanks for the thread bro, but am i calculating the offset correctly, i think am gona have to grind the trailing arms dawn or get some after market ones.
Thanks for the thread bro, but am i calculating the offset correctly, i think am gona have to grind the trailing arms dawn or get some after market ones.