16"x8" Rim offset for an FC?
#1
Formula Mazda Driver
Thread Starter
Join Date: Feb 2001
Location: Portland, Oregon, USA
Posts: 680
Likes: 0
Received 0 Likes
on
0 Posts
16"x8" Rim offset for an FC?
Ok, I've done some research, and asking around. I am getting Volk TE-37's. Pretty much I have gathered that I will need 38mm offset for 16x8's. Does anybody disagree with this?
------------------
Jeremy
Black 1990 GTU
Bonez Racepipe
Bonez Intake(K&N Cone)
FD Rims 16"x8"(obviously)
GC Coilvers(waiting for delivery)
GC Camber/Caster plates
Upgraded 4-piston calipers
AC Removed
AIM - OnlyNDrms3268
------------------
Jeremy
Black 1990 GTU
Bonez Racepipe
Bonez Intake(K&N Cone)
FD Rims 16"x8"(obviously)
GC Coilvers(waiting for delivery)
GC Camber/Caster plates
Upgraded 4-piston calipers
AC Removed
AIM - OnlyNDrms3268
#2
Junior Member
Join Date: Feb 2001
Location: west palm, fl
Posts: 32
Likes: 0
Received 0 Likes
on
0 Posts
I don't see a problem... 8inches = 203.2mm and the stock tires are 205mm
The stock wheels have a 40mm offset so the rim will be centered only 2mm wider than stock. If 205mm wide tires fit with that offset... I don't think that 203.2mm wheels (8 inches wide) will be a problem.
Just a little math and logic.
Rog
The stock wheels have a 40mm offset so the rim will be centered only 2mm wider than stock. If 205mm wide tires fit with that offset... I don't think that 203.2mm wheels (8 inches wide) will be a problem.
Just a little math and logic.
Rog
Thread
Thread Starter
Forum
Replies
Last Post
NickNac113
1st Generation Specific (1979-1985)
13
10-01-15 09:25 PM