Super AFC How har dis the install
Thread Starter
Rotary Enthusiast
Joined: Jun 2004
Posts: 950
Likes: 3
From: indiana
How hard is the SAFC II install
i just bought an SAFC II and i was woundering how hard it was to install it and also how long it would take. I have an 88n/a
Last edited by rx7b13; Aug 29, 2005 at 02:40 PM.
I'll be boosting soon!!
Joined: Jul 2005
Posts: 48
Likes: 0
From: LOS ANGELES, CA
EASY! what i did was i pulled the entire cable of the ECU clip and you'll find out that they have an 'open' crimp. so i just put the SAFC-2 cables on that then crimped them in. for the second ground i did have to strip the ECU ground cable to attach the second safc-2 ground , 'cause you have to space the two grounds 1 CM apart or more. if you want more detailed instructions PM me.
www.1300cc.com
^^ this will tell ALL !!! i did mine in about 45 min. taking my time and this includes ripping back carpet and taking off plate!!! EASY!!!
^^ this will tell ALL !!! i did mine in about 45 min. taking my time and this includes ripping back carpet and taking off plate!!! EASY!!!
Rotary Power Information
Joined: Aug 2003
Posts: 528
Likes: 0
From: New Hampshire, Greenfield
Damn carpet is a pain in the ***!!! I cut all my wires and used spade connectors 
just incase I needed to take it out for any reason. Why later i found out... there was a reason to remove the SAFC harness only
just incase I needed to take it out for any reason. Why later i found out... there was a reason to remove the SAFC harness only
Thread
Thread Starter
Forum
Replies
Last Post
trickster
2nd Generation Specific (1986-1992)
25
Jul 1, 2023 04:40 PM