Do you guys sell the thermostat housing seperately. Do you have any pic's of it too.

I can make one up if you want. I will try and get some pics posted up for you.

-S-

This is A-Spec's GT42R kit installed.

How much would it cost and did you make the one on ernieT's cars.

Why are you giving my car a thumbs down??

Yes, my kit is from A-Spec. The intercooler piping was fabricated up by PFSupercars as well as the downpipe, but the kit does come with a dp. Mine was custom because I have a full 4" exhaust.

nononon thats not what i mean. what im saying is the aluminum thermostat assembly. I like it and I want one like it. just to see if they made it for you.

Yes, A-Spec made that too.

o ok thanks that what i wanted to know to buy it off them.

what would a gt42r kit set me back?

t6 flange


is your setup on a 20b?

No, 13B. And around $4k

so would a t6 gt42r be best in 1.15 a/r and a 74?

You shouldn't need a 1.15 housing Ernie is doing just fine with the 1.01;)

Another happy customer :)

https://www.rx7club.com/showthread.p...8&page=1&pp=10

is the 1.01 also 5" vband? or 4"
if 5" how do mate a 4" DP
with a reducer or special CNC vband flange

Its a 5", but Sean welded on a reducer to 4" for it.

It comes 5" we machine it down then machine a v-band clamp. Ernie let me know when you ready for coating that turbine!!

-S-

Thanks, My car is getting a full cage put in it right now. When its done, its goin back to Rays shop so I'll ship it to you in about 3-4 weeks tops. We're putting in a "different" port on this motor and some other secret goodies for the spring.......MORE POWER!! lol....and more boost. Gonna push it to 40psi this spring.

What port will you be going with and can you explain how it will help?

Compressor Outlet Flange
 

People are always asking me about this so here you go. I can get make these in either steel or aluminum they come o-ringed and work great.

That is so damn sexy!

Ernie i'm saving up and buying one thing at a time for a similar setup to what you have. any chance i could get a peek and ride sometime would be nice.

Now Any Good Tuners In Atlanta Area! Big Injectors Occasionally Pops.

is the 1.01 the smallest available t6 exhaust housing?

Essentially yes, You can hunt down a smaller size but it will be very expensive to get.

-S-

Two questions

1. Is your CNC up yet? I'm still sleepless waiting for my kit. Any news would be great.

2. What do you recommend for an intercooler?

20b FD > GT42R