ok i recently started ressurecting my fd and ive got pretty much sqaured away , i started to bleed the clutch as i had to replace my slave cylinder and when i started to bleed it i could hear the air traveling thru the lines like a slurping sound so as soon as that stops it starts leaking fluid out of a small whole on the transmission it looks like a screw hole of some sort but i dont know what it is any help is greatly appreciated im kinda stuck here and dont know what the problem is or what to do to solve it
__________________

 

The piston inside the slave cylinder came out and then the fluid started flowing out as you pumped the clutch.
This happen, because when you replace the slave cylinder, you didn't place the plunger end of it right on the release fork cup.
Not having anything to hold the piston in place, the hydrolic pressure pushes it out and hence the leak.
You need to take it out and re-assemble the slave cylinder.
Make sure, that when you insert it again, the rubber sleeve end (has a spring inside) resist you as you insert it and you know, you are in place.
Don't ask me how I know.

 

Thank you so much I will try that this weekend and hopefully start her up I'm excited

 

Note that there are two chambers in the reservoir for the brake fluid. One for the brakes one for the clutch It helps to have the car level. Make sure it is got enough fluid in it!