View Poll Results: Where shall we Cruise????
Hooters in Addison (Blue)



4
28.57%
Bone Daddy's in Grapevine (Red)



10
71.43%
Voters: 14. You may not vote on this poll
{DFW} Rx7 Meet 9.1.07
...and the Darwin Award this year for Best Harness installation goes to....:
See above photos.
Congratulations!!!!
Read below for "Wanna Be Racers" education.
From the Schroth Website:
SHOULDER BELT ROUTING
Shoulder belts must run from the shoulders horizontally or down, at no
more than a 20° angle.
In cases where the shoulder belts must be routed down to the chassis
floor, support by a roll cage bar or harness guide at the appropriate
height is essential to establish the horizontal shoulder strap routing off
the shoulder. Most racing seats are not designed and tested to
carry shoulder belt crash loads from downward installation. Severe
injury or DEATH could result.
See above photos.
Congratulations!!!!
Read below for "Wanna Be Racers" education.
From the Schroth Website:
SHOULDER BELT ROUTING
Shoulder belts must run from the shoulders horizontally or down, at no
more than a 20° angle.
In cases where the shoulder belts must be routed down to the chassis
floor, support by a roll cage bar or harness guide at the appropriate
height is essential to establish the horizontal shoulder strap routing off
the shoulder. Most racing seats are not designed and tested to
carry shoulder belt crash loads from downward installation. Severe
injury or DEATH could result.
...and the Darwin Award this year for Best Harness installation goes to....:
See above photos.
Congratulations!!!!
Read below for "Wanna Be Racers" education.
From the Schroth Website:
SHOULDER BELT ROUTING
Shoulder belts must run from the shoulders horizontally or down, at no
more than a 20° angle.
In cases where the shoulder belts must be routed down to the chassis
floor, support by a roll cage bar or harness guide at the appropriate
height is essential to establish the horizontal shoulder strap routing off
the shoulder. Most racing seats are not designed and tested to
carry shoulder belt crash loads from downward installation. Severe
injury or DEATH could result.
See above photos.
Congratulations!!!!
Read below for "Wanna Be Racers" education.
From the Schroth Website:
SHOULDER BELT ROUTING
Shoulder belts must run from the shoulders horizontally or down, at no
more than a 20° angle.
In cases where the shoulder belts must be routed down to the chassis
floor, support by a roll cage bar or harness guide at the appropriate
height is essential to establish the horizontal shoulder strap routing off
the shoulder. Most racing seats are not designed and tested to
carry shoulder belt crash loads from downward installation. Severe
injury or DEATH could result.

James
Tried that too. Used the one at the local car wash and even with it's scalding hot water, it still wouldn't blast the **** marks and brake dust off.





