?? for you guys with BIG PORTS!
10-17-01, 11:17 PM
#26
GTR eater
Join Date: Feb 2001
Location: Tucson Arizona
Posts: 664
Likes: 0
Received 0 Likes
on
0 Posts
pic of my ports
just minus the bridge nad you should be good i have a few more pics better angles and stuff i cannot tell you how to port it since i had some one do it for me but at least you can get an idea of what it can look like
https://www.rx7club.com/vforums/atta...&postid=176839
https://www.rx7club.com/vforums/atta...&postid=176839
10-18-01, 08:48 AM
#27
Senior Member
Thread Starter
Join Date: Feb 2001
Location: Inwood, Long Island
Posts: 302
Likes: 0
Received 0 Likes
on
0 Posts
Soul Assassin,
I compared your pic to my pic #6 and it looks like it's very similar to mine, only thing is yours is a bit deeper and slightly wider, but the height looks about the same. I noticed that the angle between the face of the housing and the inside of the port is almost 90deg, but in my case they have a small slope in the begining which then drops into the port. I think that in your case you'd get alot more flow through the port. I'd love to do a BP like yours, but I'm not going to be using the car exclusively for racing so I'll stick to a "nice" streetport. What about the ports on the intermediate housing? What do those look like in your engine? Anyone else have some insight??
I compared your pic to my pic #6 and it looks like it's very similar to mine, only thing is yours is a bit deeper and slightly wider, but the height looks about the same. I noticed that the angle between the face of the housing and the inside of the port is almost 90deg, but in my case they have a small slope in the begining which then drops into the port. I think that in your case you'd get alot more flow through the port. I'd love to do a BP like yours, but I'm not going to be using the car exclusively for racing so I'll stick to a "nice" streetport. What about the ports on the intermediate housing? What do those look like in your engine? Anyone else have some insight??
10-18-01, 01:56 PM
#31
Stay tuned...
iTrader: (3)
Join Date: Jul 1997
Location: West Islip, Long Island NY
Posts: 2,917
Likes: 0
Received 1 Like
on
1 Post
Originally posted by Greg
Its either T & R or Rampage. PM me the shop name. In my opinion all I see from them is ghetto rigging **** up and ugly *** work.
Its either T & R or Rampage. PM me the shop name. In my opinion all I see from them is ghetto rigging **** up and ugly *** work.
Can you please give me some examples of what both shops have "ghetto-rigged" Even when Rampage was in business they did good work.
Greg, go to your site....
http://www.rotorheadracing.com/
Click on Image Gallery
Click on Atco - 1
Do you realise that out of the first 20pics.....13 of those are T and R Cars???????? (not counting boostn7)
.....hmmmmm I don't get it. You stood there, right infront of the shop owners, took 13 pics of their cars, took underhood shots which is cool that they have their hoods open and now you talk smack.
If you really don't like the shops you should not have pics of their cars on your site. Especially the ones with the hoods open for everyone to see how "ghetto rigged" they are.
Just my 2 cents.....
Anthony
11.1@122MPH
(stock twins and of course they "ghetto rigged" my car to run 11.1)
10-18-01, 07:58 PM
#33
Rotary Enthusiast
Join Date: Feb 2001
Location: The First State
Posts: 1,375
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by AnthonyNYC
Greg,
Can you please give me some examples of what both shops have "ghetto-rigged" Even when Rampage was in business they did good work.
Greg, go to your site....
http://www.rotorheadracing.com/
Click on Image Gallery
Click on Atco - 1
Do you realise that out of the first 20pics.....13 of those are T and R Cars???????? (not counting boostn7)
.....hmmmmm I don't get it. You stood there, right infront of the shop owners, took 13 pics of their cars, took underhood shots which is cool that they have their hoods open and now you talk smack.
If you really don't like the shops you should not have pics of their cars on your site. Especially the ones with the hoods open for everyone to see how "ghetto rigged" they are.
Just my 2 cents.....
Anthony
11.1@122MPH
(stock twins and of course they "ghetto rigged" my car to run 11.1)
Greg,
Can you please give me some examples of what both shops have "ghetto-rigged" Even when Rampage was in business they did good work.
Greg, go to your site....
http://www.rotorheadracing.com/
Click on Image Gallery
Click on Atco - 1
Do you realise that out of the first 20pics.....13 of those are T and R Cars???????? (not counting boostn7)
.....hmmmmm I don't get it. You stood there, right infront of the shop owners, took 13 pics of their cars, took underhood shots which is cool that they have their hoods open and now you talk smack.
If you really don't like the shops you should not have pics of their cars on your site. Especially the ones with the hoods open for everyone to see how "ghetto rigged" they are.
Just my 2 cents.....
Anthony
11.1@122MPH
(stock twins and of course they "ghetto rigged" my car to run 11.1)
Anthony if you took offence to that my bad, you car is dope and you know it ,its the fastest 3rd gen on the stock twins. And, I have checked out your car at the pan nats. AND I have told you on AIM that your car is tight so, you shouldnt have taken offence to that.
<<<<----------About me calling t and r ghetto---------->>>>
I know at least 5 people that I am cool with that had or tried to have **** done at T and R and got shitty results. Im sure you know of some if these complaints
<<<<-------- me having T and Rs race cars on my site------>>>>
And as far as me having their cars on my website, hell yea cause their cars are done right, their cars are fast as ****. So thats why I have them on there. I seriously doubt that if you are gonna fix your own car up you would not do it half ***.
Obviously you are buddy buddy with one of them people so you are gonna take a side somewhere. I dont give a rats *** what either shop does cause I dont plan on going there or ever racing them when my car is ready. If you want a race car then go to T and R but for most of these tight assed people on this forum then they are better off going to dave or someone along those likes.
10-18-01, 08:13 PM
#34
Rotary Enthusiast
Join Date: Feb 2001
Location: The First State
Posts: 1,375
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by nyt
why dont you just go see how ghetto rigged my car is as well from T&R, link in sig. its so ghetto rigged i can drive to the track with ac on and my stereo blasting, run faster than you, and drive home..
why dont you just go see how ghetto rigged my car is as well from T&R, link in sig. its so ghetto rigged i can drive to the track with ac on and my stereo blasting, run faster than you, and drive home..
And I am sure that T and R has some done ALOT of good **** but I havent seen any myself, except for their cars, Now, if someone takes my opinion in making their decision on a shop to tune their car is dumb cause I havent seen every car they worked on. I said before that I know of 5 people that have had junk work.
10-18-01, 09:22 PM
#38
On a long vacation
Join Date: Feb 2001
Location: Bay Area, CA, U.S.A.
Posts: 2,160
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by SPEED_NYC
Nice clean-up Greg. Romeo is my boy, I thought we were gonna have to call up aquamonster and have him 'look for you' at maple grove this weekend
cant we all just get along?
Nice clean-up Greg. Romeo is my boy, I thought we were gonna have to call up aquamonster and have him 'look for you' at maple grove this weekend
cant we all just get along?
10-18-01, 09:26 PM
#39
Full Member
Join Date: May 2001
Location: 4th Quadrant
Posts: 212
Likes: 0
Received 0 Likes
on
0 Posts
T and R baby!!!!
Like Trech said, "If you haven't been to the ghetto....." . Well Greg I couldn't finish the qoute because you now how sensitive some people can get.
In any event, you can't please them all. I've heard good and bad about every shop, even KD from forum members. False accusations, however, should be better though out before making unjust accusations.
Let's keep the peace. Any of you guys coming up this weekend to Maplegrove??
In any event, you can't please them all. I've heard good and bad about every shop, even KD from forum members. False accusations, however, should be better though out before making unjust accusations.
Let's keep the peace. Any of you guys coming up this weekend to Maplegrove??
10-18-01, 09:47 PM
#40
Wayne, I'm most likely gonna make the trip out there to watch as usual, I'm still waiting for a local shop to get my clutch in from the manafacturer 
James, remember me? Mikes friend that was building the TII BMW? are you gonna take the vert to the track this weekend? we can make maple grove look like atco with all the Queens/L.I. RX's
James, remember me? Mikes friend that was building the TII BMW? are you gonna take the vert to the track this weekend? we can make maple grove look like atco with all the Queens/L.I. RX's
10-18-01, 10:39 PM
#42
Rotary Enthusiast
Join Date: Feb 2001
Location: The First State
Posts: 1,375
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by SPEED_NYC
yeah, greg, what ever happened with that whole aquamonster thing?
yeah, greg, what ever happened with that whole aquamonster thing?
Ill be at maple grove too,
Jim, you plan on ever attending one of these events, the season is almost over!
10-18-01, 10:59 PM
#43
On a long vacation
Join Date: Feb 2001
Location: Bay Area, CA, U.S.A.
Posts: 2,160
Likes: 0
Received 0 Likes
on
0 Posts
Roan, right? If I can get my rear fixed(busted mount) on Saturday I'll try to make it. I want to see Romeo's car run!
Originally posted by SPEED_NYC
Wayne, I'm most likely gonna make the trip out there to watch as usual, I'm still waiting for a local shop to get my clutch in from the manafacturer
James, remember me? Mikes friend that was building the TII BMW? are you gonna take the vert to the track this weekend? we can make maple grove look like atco with all the Queens/L.I. RX's
Wayne, I'm most likely gonna make the trip out there to watch as usual, I'm still waiting for a local shop to get my clutch in from the manafacturer
James, remember me? Mikes friend that was building the TII BMW? are you gonna take the vert to the track this weekend? we can make maple grove look like atco with all the Queens/L.I. RX's
10-18-01, 11:02 PM
#44
On a long vacation
Join Date: Feb 2001
Location: Bay Area, CA, U.S.A.
Posts: 2,160
Likes: 0
Received 0 Likes
on
0 Posts
Re: T and R baby!!!!
Wayne, I'll try to make it. I HAVE to go to at least one event.
Originally posted by waynespeed
Like Trech said, "If you haven't been to the ghetto....." . Well Greg I couldn't finish the qoute because you now how sensitive some people can get.
In any event, you can't please them all. I've heard good and bad about every shop, even KD from forum members. False accusations, however, should be better though out before making unjust accusations.
Let's keep the peace. Any of you guys coming up this weekend to Maplegrove??
Like Trech said, "If you haven't been to the ghetto....." . Well Greg I couldn't finish the qoute because you now how sensitive some people can get.
In any event, you can't please them all. I've heard good and bad about every shop, even KD from forum members. False accusations, however, should be better though out before making unjust accusations.
Let's keep the peace. Any of you guys coming up this weekend to Maplegrove??
10-18-01, 11:04 PM
#45
On a long vacation
Join Date: Feb 2001
Location: Bay Area, CA, U.S.A.
Posts: 2,160
Likes: 0
Received 0 Likes
on
0 Posts
I guess I better be there.
Originally posted by Greg
I was there but the only thing that was on my mind was the racing, I was there solo. And , I dont even go into the car show part so maybe he was there chillin with his 40 friends that will die for him
Ill be at maple grove too,
Jim, you plan on ever attending one of these events, the season is almost over!
I was there but the only thing that was on my mind was the racing, I was there solo. And , I dont even go into the car show part so maybe he was there chillin with his 40 friends that will die for him
Ill be at maple grove too,
Jim, you plan on ever attending one of these events, the season is almost over!
10-19-01, 05:37 PM
#48
Full Member
Join Date: May 2001
Location: 4th Quadrant
Posts: 212
Likes: 0
Received 0 Likes
on
0 Posts
Hope this gives some insight.
Last edited by waynespeed; 10-19-01 at 05:47 PM.
10-20-01, 08:46 PM
#49
Junior Member
Join Date: Mar 2001
Location: Redwood, CA
Posts: 12
Likes: 0
Received 0 Likes
on
0 Posts
10-20-01, 09:12 PM
#50
Senior Member
Thread Starter
Join Date: Feb 2001
Location: Inwood, Long Island
Posts: 302
Likes: 0
Received 0 Likes
on
0 Posts
Wow, that last link has some real big exhaust porting! Could I port my exhaust that big or would I have problems with the intake ports? Are the two directly proportional or can I make them as big as I want independently and not have problems? My exhaust ports are "much" smaller than those. I'll take some pics tomorrow.