smooth13b

i just bought a used greddy TD06-20g turbo kit. and the wastegate needs an adaptor to fin on the manifold. It came with the type-s wastegate but it would fit with the type -r witch come with.

smooth13b

sorry i was in a big hurry when i typed this and i realise it doesn't make alot of sence so let me try agin.

Anyway i bought a Td06 kit from someone on e-bay and it all looks good exept the wastegate doesn't bolt right on.The wastegate that came with it it the Greddy Type-s and i went to a couple sites like rx-7 store and it says the kit comes with the type-r wastegate that has a good bit larger diameter opening i i think would bolt right on. Is this true ,did i get the wrong wastegate do i need to try to get some money back, let me know.

smooth13b

is it ok to use the greddy type-s wastegate for about 350whp with TD06-20G at somewere around 13 psi. (will it give me boost creep?)

EpitrochoidMan

I would just play it safe and go bigger. The 20g should be good for over 400hp.

smooth13b

I thought so , well i geuss i need to go get a new wastegate. Thx for your help

RX-Heven

iTrader: (1)

You would be hard pressed to get 400whp out of that turbo.
Type r is a bigger and better wg, so if you want to play it safe....
The type s should be fine though.

onefastrx7turbo

iTrader: (5)

yea, what RX said..youd be lukcy to get that from a 20G. A 25G is "capable" to like 450 or so