Wich turbo kitis best for everyday driving
Wich turbo kitis best for everyday driving
its legal too well cept the wastegate
Embassador to SOY
Joined: Mar 2002
Posts: 4,194
Likes: 0
From: Los Angeles, CA.
Go with the XS TO4E, it's very streetable with a quick spool, and it's also rebuildable. There's no waiting for a new turbo to come in from japan and no down time like that of an apex kit.
Trending Topics
Embassador to SOY
Joined: Mar 2002
Posts: 4,194
Likes: 0
From: Los Angeles, CA.
Evil, the to4s will give you more top end juice because the inlet is 4 inches and the to4e will give you better spool and mid range power because the inlet is something like 2.5 inches. The "E" is for the street and the "S" is for the strip.
http://www.xs-engineering.com/
Check their site and the dyno chart for both kits. See the torque and power curves.
I choose the T04e kit for those reasons. I drive 100% on the street. Nothing at the strip.
Ken
Check their site and the dyno chart for both kits. See the torque and power curves.
I choose the T04e kit for those reasons. I drive 100% on the street. Nothing at the strip.
Ken
Originally posted by apexkw
my rx6 has like a 4in inlet...damn i thought the to4e was bigger than 2.5.....
my rx6 has like a 4in inlet...damn i thought the to4e was bigger than 2.5.....
When I talked to XS they said I could effectively run 25psi boost with the right tuning and fuel.
I plan on doing that this summer with 110 octane fuel and water injection.
Ken
root
Joined: Mar 2001
Posts: 1,200
Likes: 0
From: Phoenix, AZ
Originally posted by SERIES7
Evil, the to4s will give you more top end juice because the inlet is 4 inches and the to4e will give you better spool and mid range power because the inlet is something like 2.5 inches. The "E" is for the street and the "S" is for the strip.
Evil, the to4s will give you more top end juice because the inlet is 4 inches and the to4e will give you better spool and mid range power because the inlet is something like 2.5 inches. The "E" is for the street and the "S" is for the strip.
It is a great turbo for the street too IMO.. But definatly more top end.
If you want a ball bearing turbo i would say Apexi RX6 for great spoolup and GT35/40 for top end
Probably the same with the TO4E and TO4S...
EDIT: i have heard the GT35/40 gets full boost ~3800rpms where the RX6 gets it below 3000rpms. But depending on porting and such that changes.
-Zach
root
Joined: Mar 2001
Posts: 1,200
Likes: 0
From: Phoenix, AZ
Originally posted by SERIES7
So are the myths true about not being able to rebuild a ball bearing turbo?
So are the myths true about not being able to rebuild a ball bearing turbo?
Yes and no.. In japan they can be rebuilt.. in the US they can be repaired sometimes.. either that or you buy a new center cartrige..
-Zach
in slow, out fast!
Joined: Apr 2002
Posts: 1,388
Likes: 0
From: Florida
dougie i wish i had the rx6b...but i dont know how to confirm that its a b.....i have talked to a couple of people and they say my car makes boost way to soon to be the big turbo....i can telll you this though. my kit is one of the first kits that apex came out with. my turbo looks nothing like maxcoopers setup....sits in a totally dif spot. it makes nice power at 13psi though...enough to peel out at 70 mph :p
Thread
Thread Starter
Forum
Replies
Last Post
CaptainKRM
2nd Generation Specific (1986-1992)
14
Aug 26, 2015 09:52 PM
