Who has experience with an S400 on a 13b?
#1
Who has experience with an S400 on a 13b?
Hey guys, looking at a nice new S400 from someone local, here are the specs. I have no idea what it flows, someone's help on that would be nice.
BW S400
72mm compressor , 96mm turbine
T6 1.32 A/R
Looking to make 500hp (min) , going with either half bridge or large street port. Need spool time, power, ect. Running Haltech, Meth, twin scroll manifold, dual Wastegate.
BW S400
72mm compressor , 96mm turbine
T6 1.32 A/R
Looking to make 500hp (min) , going with either half bridge or large street port. Need spool time, power, ect. Running Haltech, Meth, twin scroll manifold, dual Wastegate.
#6
Sponsor
iTrader: (41)
I would recommend the .91 twin scroll for a slightly more responsive setup, or a 1.0 for more top end power. I did 500+ with the 1.0. I also recommend the 3" vband vs the marmon flange as it will fit with a larger variety of setups. Do you have a manifold and downpipe already?
Thread
Thread Starter
Forum
Replies
Last Post
Jeff20B
1st Generation Specific (1979-1985)
73
09-16-18 07:16 PM
AMOC
SE RX-7 Forum
1
09-10-15 09:42 AM