Anybody know of a good (read: cheap) place to get fuel injectors? I'd like to replace my 13 year old 550's with new injectors (w/ new wires, connectors, etc.). Making a new fuel rail is not a problem.

Also, recommendations on sizing would be appreciated! I'm running a 60-1 with 160#/hr secondaries at the moment.

Thanks!,
Manolis

 

If your injector duty cycles are good, why change from the 550s? If you want new 550 injectors, just order them from Malloy Mazda or Mazdaformance (or MazdaMotorSports if you're a member).

 

Actually I'd be happy with just getting the 550's cleaned if it weren't for the clips / wires. They're at least 13 years old, and very brittle, and I don't like trusting my engine / turbo to wires like that . Is it possible to buy new injector clips? That would be great!

 

mototron.com, It's for the domestic market, but fuel is fuel.

Ryan

 

http://www.fuelinjectors.com/

 

RC Engineering can modify your stock injectors and also will clean and calibrate.



93 touring

 

Here is there number
310-320-2277
located in Gardena

 

www.cruzinperformance.com does cleaning and flow testing for $11 per injector. Cheaper than RC engineering who wants $25

You can get new injector plugs too. I got a set of 6 pack of injector plugs off ebay for a toyota supra for $25. They are the same as the S4 RX-7 injectors.
I did a search for injector connector and I came up with some that were similar to these:

http://cgi.ebay.com/ebaymotors/ws/eB...tem=2443396972

 

cool, thanks for the info guys! I think i'll end up just getting mine cleaned / flow tested and buying new clips for 'em!