Any help would be great. Basically my wife is going to be out of town for a week so I will get to work on my car pretty much non stop over the next week (after work of course) and would like to have all the parts in so I don't have to order anything. I have an 044 on the way right now but I don't want to have to wait till it gets here to figure out the fittings I'll need to adapt it to -6AN fuel lines. Also would a 100 micron filter before it be recommended? THanks guys.

 

anyone?

 

Normally it's--->

Inlet Connection: M18x1.5
Outlet Connection: M12x1.5

I don't know what size you're using on the inlet but this is for a #10 on the inlet.

Summit/Earl's part # AER-FBM2245

This is for the outlet that you requested in #6 size.

Summit/Earl's part # EAR-9919DFGERL

The 100 micron is ok on the inlet. You should use a 10 to 40 micron on the outlet also.

 

Thanks crispeed I appreciate your help greatly! I'm going to go with #8 inlet (if your saying # = AN sizes). I'm going to make the order now. Thanks again man!