Using a 13b In a Dune Buggy??
03-02-03, 07:23 PM
#1
Junior Member
Thread Starter
Join Date: Mar 2003
Location: San Diego
Posts: 9
Likes: 0
Received 0 Likes
on
0 Posts
Using a 13b In a Dune Buggy??
Hey Guys
Sorry for the newbie question but i about to build a Sand Rail/Dune Buggy and want to install a Rotary Engine in it (i have always been a fan of RX7's and love driving them)
Anyone have any advice on such a swap?
I was thinking of using a TurboII motor but was wondering how hard the EFI and sensors and such would be to wire up. Or should it be converted to carbs?
Or also, i have heard that you can install the 13b and fit it with some Webers. Is this a good idea?
Do the Turbos really produce that much more Torque?
Anyone have a chart that lists the different rotary engines and their power outputs??
Any advice on using a rotary engine in a sand rail would be greatly appreciated
Thanks
Sorry for the newbie question but i about to build a Sand Rail/Dune Buggy and want to install a Rotary Engine in it (i have always been a fan of RX7's and love driving them)
Anyone have any advice on such a swap?
I was thinking of using a TurboII motor but was wondering how hard the EFI and sensors and such would be to wire up. Or should it be converted to carbs?
Or also, i have heard that you can install the 13b and fit it with some Webers. Is this a good idea?
Do the Turbos really produce that much more Torque?
Anyone have a chart that lists the different rotary engines and their power outputs??
Any advice on using a rotary engine in a sand rail would be greatly appreciated
Thanks
03-02-03, 07:49 PM
#2
WTB** Very Low Miles 94-95
Join Date: Jul 2001
Location: Tejas
Posts: 3,298
Likes: 0
Received 0 Likes
on
0 Posts
go here www.rotaryracing.com
rotary reliability and racing builds rotary sandrails. Ive seen them....nice too.
7148398018 is their number if you want to deal with them. you should check them out seeing that you are only an hour away.
ask for nick or louis
j
rotary reliability and racing builds rotary sandrails. Ive seen them....nice too.
7148398018 is their number if you want to deal with them. you should check them out seeing that you are only an hour away.
ask for nick or louis
j
03-04-03, 10:00 AM
#4
Gone Darkside
iTrader: (14)
Join Date: Mar 2001
Location: Irmo, SC USA
Posts: 2,569
Likes: 0
Received 0 Likes
on
0 Posts
or, you can go to www.fc3s.org Email Craig. He has built a few. They're in the Escondido area, I believe.
Thread
Thread Starter
Forum
Replies
Last Post
LongDuck
1st Generation Specific (1979-1985)
12
10-07-15 08:12 PM
