Turbo Suggestions for BP 3rd Gen?
#1
Senior Member
Thread Starter
Join Date: Jun 2001
Location: Louisville, KY
Posts: 593
Likes: 0
Received 0 Likes
on
0 Posts
Turbo Suggestions for BP 3rd Gen?
I did some searching and I couldn't find any real answers. I found some people that had wrong combo's and etc. I want to go either full BP or a half BP when I get my motor rebuilt. I want to know what the best turbo would be for that motor. The car will be "street legal" but not my daily driver by any means. It's going to be mostly a 1/4 mile car. I've been looking at a Garrett GT3540 Dual BB (.70/1.06).
#2
great turbo, i have one on the way to put onto my Gen 3 motor (exact same specs), and a few mates that run them. I havent spoken to anybody that has run one on a BP thought. In Oz nobody bothers to play with BP Turbos, so i cant say.
#3
Banned. I got OWNED!!!
TO4R is a great spec for 600bhp will be good for 700bhp at high (30psi) boost pressure.
With full bridge or PP e-mail me and I will provide you with a price and spec for turbo for this aplication.
NOTE, You need to be honest about the power figures you want and tell me what rpm range you want the motor to function at.
Regards.
Peter.
With full bridge or PP e-mail me and I will provide you with a price and spec for turbo for this aplication.
NOTE, You need to be honest about the power figures you want and tell me what rpm range you want the motor to function at.
Regards.
Peter.
#4
Originally posted by RICE RACING
TO4R is a great spec for 600bhp will be good for 700bhp at high (30psi) boost pressure.
With full bridge or PP e-mail me and I will provide you with a price and spec for turbo for this aplication.
NOTE, You need to be honest about the power figures you want and tell me what rpm range you want the motor to function at.
Regards.
Peter.
TO4R is a great spec for 600bhp will be good for 700bhp at high (30psi) boost pressure.
With full bridge or PP e-mail me and I will provide you with a price and spec for turbo for this aplication.
NOTE, You need to be honest about the power figures you want and tell me what rpm range you want the motor to function at.
Regards.
Peter.
For me!
40 to 45 psi between 7500 and 10K rpm!
crispeed
87 Rx-7 FC
9.206@150.47mph
2600lbs
Thread
Thread Starter
Forum
Replies
Last Post
streetlegal?
New Member RX-7 Technical
13
03-17-22 02:46 PM
KAL797
Test Area 51
0
08-11-15 03:47 PM