turbine housing
#1
Rotary Enthusiast
Thread Starter
iTrader: (9)
Join Date: Jun 2003
Location: west
Posts: 1,191
Likes: 0
Received 0 Likes
on
0 Posts
turbine housing
Anyone have a .96 tang with vband ? I'm having a REALLY fricken hard time anyone willing to weld a vband flange. I know it's difficult to do but not impossible. Living on an island has it's downs since no one knows **** about welding disimilar metals.
So, I'm willing to buy a vband tang .96 P-trim housing if anyone has a spare.
So, I'm willing to buy a vband tang .96 P-trim housing if anyone has a spare.
#2
NASA geek
iTrader: (2)
All they need to know is it must be TIG welded using nickle rod/filler. Heat both the v-band flange and the turbine housing in an oven before welding and let it cool off slowly after you weld it. MAke sure BOTH surfaces are scuffed up and CLEAN before welding. FWIW, you can buy these already done from most Garrett distributers/retailers.
~Mike...........
~Mike...........
#3
Rotary Enthusiast
Thread Starter
iTrader: (9)
Join Date: Jun 2003
Location: west
Posts: 1,191
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by RacerXtreme7
All they need to know is it must be TIG welded using nickle rod/filler. Heat both the v-band flange and the turbine housing in an oven before welding and let it cool off slowly after you weld it. MAke sure BOTH surfaces are scuffed up and CLEAN before welding. FWIW, you can buy these already done from most Garrett distributers/retailers.
~Mike...........
~Mike...........
#5
Junior Member
Join Date: Jan 2003
Location: Auckland, New Zealand
Posts: 37
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by boosted1205
Anyone have a .96 tang with vband ? I'm having a REALLY fricken hard time anyone willing to weld a vband flange. I know it's difficult to do but not impossible. Living on an island has it's downs since no one knows **** about welding disimilar metals.
So, I'm willing to buy a vband tang .96 P-trim housing if anyone has a spare.
So, I'm willing to buy a vband tang .96 P-trim housing if anyone has a spare.
Thread
Thread Starter
Forum
Replies
Last Post