Tial 44mm WG, 13psi spring, any problems?
#26
Rotary Freak
iTrader: (12)
Id bet your running you boost controller off one of the manifold nipples which if you are then thats why you cant lower your boost by the time the pressure gets to the boost controller its already in the engine!
Now I used to have your problem
BUT Ray wilson put a nipple right off the compressor for the boost controller and now I can turn the boost down to 12psi constant with the red and yellow springs in the wastegate
The only bad info in this thread is the crap your saying
Now I used to have your problem
BUT Ray wilson put a nipple right off the compressor for the boost controller and now I can turn the boost down to 12psi constant with the red and yellow springs in the wastegate
The only bad info in this thread is the crap your saying
The boost controller has nothing to do with why you are running 12 psi with a 13 lb spring. Dudemaaanownsanrx7 explaied why your set-up is working well for you.
Thread
Thread Starter
Forum
Replies
Last Post
Jeff20B
1st Generation Specific (1979-1985)
73
09-16-18 07:16 PM
[For Sale] Scratch & Dent, Used, and Open-Box Sale!
SakeBomb Garage
Vendor Classifieds
5
08-09-18 05:54 PM