T2 Turbo Classification/alternate parts list
#1
Technician
Thread Starter
iTrader: (1)
Join Date: Aug 2006
Location: Virginia
Posts: 1,008
Likes: 0
Received 0 Likes
on
0 Posts
T2 Turbo Classification/alternate parts list
It seems that no one is able to answer this kind of question so I figure I'd ask it here:
The Hotside from the turboII I have has some pretty nasty cracks in the inside of the housing. I would like to replace that housing with a brand spanking new housing from an aftermarket turbo place (such as atpturbo.com) but i'm not sure of the classification of the turbo, or which turbo will work with it. I was told by certain persons that it's a T3/T4 Hybrid, but i'm not sure how much I trust that information.
What other turbo components will work with the stock turbo from an 86-91 Turbo?
Compression housings?
Turbine Housings?
Intermediate adapters (for oil and water)?
Any other modifications that could be done to the stock turbo.
(extra information: the compression housing i have on here now is a Garrett with the part number:409080-5009. I'll do some more research regarding that part number and see what turbos it fits--maybe that will point me in the right direction for the turbine housing?)
The Hotside from the turboII I have has some pretty nasty cracks in the inside of the housing. I would like to replace that housing with a brand spanking new housing from an aftermarket turbo place (such as atpturbo.com) but i'm not sure of the classification of the turbo, or which turbo will work with it. I was told by certain persons that it's a T3/T4 Hybrid, but i'm not sure how much I trust that information.
What other turbo components will work with the stock turbo from an 86-91 Turbo?
Compression housings?
Turbine Housings?
Intermediate adapters (for oil and water)?
Any other modifications that could be done to the stock turbo.
(extra information: the compression housing i have on here now is a Garrett with the part number:409080-5009. I'll do some more research regarding that part number and see what turbos it fits--maybe that will point me in the right direction for the turbine housing?)
#2
Technician
Thread Starter
iTrader: (1)
Join Date: Aug 2006
Location: Virginia
Posts: 1,008
Likes: 0
Received 0 Likes
on
0 Posts
Possible compatible turbos
Based upon measurements of the turbo inducer and exducer (on the hotside, warning it is not extremely accurate!) here are a list of possible compatible turbos to try out--this is according to the information provided here.
For the inducer I measured a little less than 2.9375 in (dia). This means that the hotside can likely support:
T04R
GT40
T78 (unsure)
T88 (unsure)
Anyone confirm or deny?
For the inducer I measured a little less than 2.9375 in (dia). This means that the hotside can likely support:
T04R
GT40
T78 (unsure)
T88 (unsure)
Anyone confirm or deny?
Thread
Thread Starter
Forum
Replies
Last Post
KAL797
Test Area 51
0
08-11-15 03:47 PM