oktay400

I Am About To Install A T-78 Turbo Kit In My Fd, But I Dont Know If There Are Any Precautions I Should Take Or If There Are Any Tricks I Should Know About Before I Install It. I Am Using A Haltech 2 Engine Managment Peter Ferrell 4 Row Custom Innercooler, I Believe It Is A Apex Waste Gate And A Supra Fuel Pump. It Was On My Friends Fd But Then He Wrecked It. He Did Not Do The Install So He Is Not That Helpful To Me. I Also Need To Get Some Injectors, Anyone Know What Kind I Should Get And Where To Get Theme From? Should I Get Bigger Fuel Rails? Any Info Would Be Geatly Appreciated!

darkphantom

iTrader: (2)

before you install the T78 do you have a big enough intercooler to support the boost. Make sure you have all the tools to put the turbo on cause taking the old twins takes about 3 hours (even for a newbie) putting the t78 is a little harder. Also you need bigger injectors than stock (thats not an option) Plus you need block off plates for the solenoids & the air pump cause you wont need those. block off plates range around $80 bucks for the whole set (www.rx7store.net)

just to give you some other stuff you will need thats very important. a walboro fuel pump will work better than a supra fuel pump/ upgrade your clutch to handle the extra power/ boost controller/intercooler/wideband if you will be rasing the boost past 15psi/ those are the majior thinkg you will need!

http://www.negative-camber.org/crispyrx7/gt35rpage1.htm that website will help out alot on how to install & what you need.
also use the search button. tons of other people have asked (I had to do the install on my own as well) and didnt know what to do. So good luck!


P.S. it will take about 3-4 days to complete if you dont work that many hours a day

oktay400

sorry for the delay. Greatly apprecieated.