suggestion on set up
11-11-09, 10:42 AM
#1
Full Member
Thread Starter
iTrader: (4)
Join Date: May 2008
Location: Othello washington
Posts: 179
Likes: 0
Received 0 Likes
on
0 Posts
suggestion on set up
Ok well i figured i would post my set up in case I'm missing something and to get some input, any help is always nice lol. First of all like a lot of people my goal is around 300hp or close to it nothing drastic in my opinion. I basically want the car for a weekend warrior/track. ok the parts i have so far are...
Car: S4 87 RX7 TII
Turbo: Garrett turbo T3/T4 AR50/63 (PSI for 300hp or close to?)
Wastegate: Tial 38mm V-band
ECU: Haltech E6k
Intercooler: FMIC
Manifold: Rmagic tubular manifold
Fuel pump: 255 walbro
Injectors 550/550 (i know i need to upgrade my secondaries suggestion on size?)
That's about all i can think of at the moment. Everything sound alright to you guys or am i forgetting something? ooh yeah the car has stock ports. Thanks
Car: S4 87 RX7 TII
Turbo: Garrett turbo T3/T4 AR50/63 (PSI for 300hp or close to?)
Wastegate: Tial 38mm V-band
ECU: Haltech E6k
Intercooler: FMIC
Manifold: Rmagic tubular manifold
Fuel pump: 255 walbro
Injectors 550/550 (i know i need to upgrade my secondaries suggestion on size?)
That's about all i can think of at the moment. Everything sound alright to you guys or am i forgetting something? ooh yeah the car has stock ports. Thanks
11-12-09, 01:10 PM
#3
I would run at least the ID1000 fuel injectors for secondaries if you're on a budget; if not get the ID2000.
I would run a tial 44mm if you plan on running less than 15psi.
Turbo should be a straight T4. A 57 Trim To4E in a 1.0 housing will work great, and they are relatively cheap..
I would run a tial 44mm if you plan on running less than 15psi.
Turbo should be a straight T4. A 57 Trim To4E in a 1.0 housing will work great, and they are relatively cheap..
Thread
Thread Starter
Forum
Replies
Last Post
streetlegal?
New Member RX-7 Technical
13
03-17-22 02:46 PM
Skeese
Adaptronic Engine Mgmt - AUS
65
03-28-17 03:30 PM