Some uninstalled pics of my 500r and other mods being bolted on
03-08-07, 09:52 PM
#376
Originally Posted by GoodfellaFD3S
It's a Blitz fmic, got it from Gotham.
Hondahater, I plan to run 17 psi on pump with my water injection full time. on c16 I'd like to see what the car dynoes at 25ish psi, but I have to get my fuel pump issue sorted first. Supposedly the apexi bnr32/33 that I run has an internal diverter valve that won't allow pressures that high. Honestly, the car is fast enough for me right on the wg spring that I don't feel the need to mess with c16 right
Hondahater, I plan to run 17 psi on pump with my water injection full time. on c16 I'd like to see what the car dynoes at 25ish psi, but I have to get my fuel pump issue sorted first. Supposedly the apexi bnr32/33 that I run has an internal diverter valve that won't allow pressures that high. Honestly, the car is fast enough for me right on the wg spring that I don't feel the need to mess with c16 right
03-08-07, 10:05 PM
#377
Rotary Enthusiast
Originally Posted by GoodfellaFD3S
25ish psi, but I have to get my fuel pump issue sorted first. Supposedly the apexi bnr32/33 that I run has an internal diverter valve that won't allow pressures that high. Honestly, the car is fast enough for me right on the wg spring that I don't feel the need to mess with c16 right
03-09-07, 06:53 AM
#379
Original Gangster/Rotary!
Thread Starter
iTrader: (213)
Originally Posted by atihun
I thought the brn will "only" go to 75 psi, which would mean your pump should be around 63-65 psi at 25 psi of boost, no?
03-09-07, 08:24 AM
#381
Original Gangster/Rotary!
Thread Starter
iTrader: (213)
Originally Posted by Barban
Im really really impressed with your setup et al
03-09-07, 08:34 PM
#384
Junior Member
Join Date: Mar 2007
Location: NEW YORK
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by GoodfellaFD3S
According to Max Cooper's site, there's an approx pressure drop through the system of 15 psi. So my current base pressure of 40 psi + the 15 psi pressure drop = 55, leaving me with only 20 psi for boost pressure. I'd really rather not push the envelope with this, so I've got some further research to do. The car pulled very hard on a recent 19 psi 4th gear redline pull with no fuel px issues whatsoever......
03-24-07, 05:49 PM
#385
Original Gangster/Rotary!
Thread Starter
iTrader: (213)
Originally Posted by Rocking Rotary
How bout some dyno numberss rich? I am realy looking forward to seeing what it can do on the rollers.
03-25-07, 01:39 AM
#386
Serbian
iTrader: (1)
Join Date: Nov 2006
Location: phoenix
Posts: 246
Likes: 0
Received 0 Likes
on
0 Posts
That was a long tread 
... I read it all in about 3 hours and i can tell you one thing--- it was worth it. I'll try to get some cash and get a frigin 500r. By the way beautifull car goodfella. What do you think your car would do at the track?
Mirko
... I read it all in about 3 hours and i can tell you one thing--- it was worth it. I'll try to get some cash and get a frigin 500r. By the way beautifull car goodfella. What do you think your car would do at the track?Mirko
03-25-07, 11:39 AM
#387
Nearing Completion...
iTrader: (473)
Join Date: Aug 2006
Location: Chicago
Posts: 4,735
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by GoodfellaFD3S
Dyno numbers coming soon.......
Can't wait!!! We all need some confirmation as to how fast your car really is
. What boost levels are you planning on dyno'ing it for?
05-02-07, 04:55 PM
#391
Original Gangster/Rotary!
Thread Starter
iTrader: (213)
Originally Posted by Eggie
Bump!
Originally Posted by GoodfellaFD3S
Keeping in mind that my chassis now has 115k miles on it:
(1) original bushings and pillow ***** are now officially shot. Super pros and new pillow ***** on hand waiting for install.
(2) Idle Speed Control Solenoid died, thus the reason for my high idle. No biggie, I have a few good used ones.
(3) Speeding ticket about 10 minutes after helping get Carl's/mp5's FD running again...140 bucks down the drain, what happened to karma? Officer informs me 80 in a 55 will get me $280 and mandatory NC court appearance, 'does me a favor' by making it 70 in a 55. Doesn't he know the FD can't cruise at 55? It isn't possible
(4) Suspension seems to be bottoming out a bit, my 6 year old Tanabe's might have finally died. Autopsy report pending.
(5) This one hurts the worst.....after driving about 1800 miles, a rock kicked up off the highway took a chunk of paint off my roof about 20 minutes from the end of the trip!
(6) Edit: last thing, loud buzzing coming from the fuel tank. I think the baffles in the tank broke loose on me....this showed up at the end of the trip.
(1) original bushings and pillow ***** are now officially shot. Super pros and new pillow ***** on hand waiting for install.
(2) Idle Speed Control Solenoid died, thus the reason for my high idle. No biggie, I have a few good used ones.
(3) Speeding ticket about 10 minutes after helping get Carl's/mp5's FD running again...140 bucks down the drain, what happened to karma? Officer informs me 80 in a 55 will get me $280 and mandatory NC court appearance, 'does me a favor' by making it 70 in a 55. Doesn't he know the FD can't cruise at 55? It isn't possible
(4) Suspension seems to be bottoming out a bit, my 6 year old Tanabe's might have finally died. Autopsy report pending.
(5) This one hurts the worst.....after driving about 1800 miles, a rock kicked up off the highway took a chunk of paint off my roof about 20 minutes from the end of the trip!
(6) Edit: last thing, loud buzzing coming from the fuel tank. I think the baffles in the tank broke loose on me....this showed up at the end of the trip.
05-02-07, 06:29 PM
#394
development
If that's all that happened to a 15 year old, 500hp sports car, being driven like it's stolen...you are doing just fine
oh, sucks about the ticket and rock though...
oh, sucks about the ticket and rock though...
05-02-07, 07:26 PM
#395
Originally Posted by GoodfellaFD3S
According to Max Cooper's site, there's an approx pressure drop through the system of 15 psi. So my current base pressure of 40 psi + the 15 psi pressure drop = 55, leaving me with only 20 psi for boost pressure. I'd really rather not push the envelope with this, so I've got some further research to do. The car pulled very hard on a recent 19 psi 4th gear redline pull with no fuel px issues whatsoever......
My system is AN-08 supply from the Bosch '044 pump, with an equal length split of AN-06 into the rails and then into the FPR, then AN-08 return line.
I about 5psi drop, measured at supply and tank return. I have seen 70 psi logged from the FPR.
Tony
05-02-07, 09:04 PM
#396
Originally Posted by GoodfellaFD3S
Unfortunately I now have other things that take priority over dyno numbers. Recently completed a ~1800 mile roundtrip jaunt down to DGRR, and the Tail of the Dragon put a whoopin' on my FD. Taken from the 'What did you break at DGRR 07?' thread:
05-02-07, 09:29 PM
#397
Original Gangster/Rotary!
Thread Starter
iTrader: (213)
Originally Posted by Asleep
I don't see that much of a pressure drop with aftermarket lines. I thought your lines were upgraded?
My system is AN-08 supply from the Bosch '044 pump, with an equal length split of AN-06 into the rails and then into the FPR, then AN-08 return line.
I about 5psi drop, measured at supply and tank return. I have seen 70 psi logged from the FPR.
Tony
My system is AN-08 supply from the Bosch '044 pump, with an equal length split of AN-06 into the rails and then into the FPR, then AN-08 return line.
I about 5psi drop, measured at supply and tank return. I have seen 70 psi logged from the FPR.
Tony
05-02-07, 09:31 PM
#398
Original Gangster/Rotary!
Thread Starter
iTrader: (213)
Originally Posted by dubulup
If that's all that happened to a 15 year old, 500hp sports car, being driven like it's stolen...you are doing just fine
oh, sucks about the ticket and rock though...
oh, sucks about the ticket and rock though...
05-02-07, 09:32 PM
#399
Original Gangster/Rotary!
Thread Starter
iTrader: (213)
Originally Posted by Rotary Experiment Seven
Eh thats what the shop is for. Once we get caught up we will fix her.