Is there a hose diagram floating around for single turbo/non-seq with the use of the air pump? I need to keep it for smog.

Searches only came up with a non airpump version. I'm sure I could figure it out, but it would just be easier to if a diagram is already made.

Thanks

 

No because it is not needed!

If you still have an ACV on the LIM, hook it up there as is done for the stock twins.
But remove the valve for the solenoid that controls air flow to the cat so that air always flows to the cat. If you have a MP, put a pipe on it so the cat hose connects to it. The single turbo exhaust manifold does not allow air flow into the exhaust like the stock manifold does.

Or have the air pump pipe outlet bypass the ACV and go directly to the cat/MP.
I use the latter as my engine does not have a ACV.

All of this is simple basic mechanics.