Single Turbo a 96 Rx7
Thread Starter
Junior Member
Joined: May 2006
Posts: 13
Likes: 0
From: NEW ZEALAND
Single Turbo a 96 Rx7
[SIZE=6][SIZE=2]I know i have added a threat already with regards to going single on a 3rd Gen Rx7. The only problem i am facing with the threads etc is that i drive a Jap imported Series 7 Rx7.. 96 model and the vaccum hoses run off a different set up to a 93 model.
For example:
The SPAGHETTI crap under the top manifold is a black plastic box where sensors and vacc hoses plug into.. and different to the 93 that has metal piping for Vacc hoses.
Has anyone on this site single turbo'd a Series 7 FD? And if so do you have any tips.
I want to be able to do the set up etc by myself and leave the fitting of the microtech to the pros.. i was quoted 3k to fit the turbo, sort out the vacc hoses and i think its a damn rip off.
ANy help would be appreciated
Poor FD owner from NZ[COLOR=Navy]
For example:
The SPAGHETTI crap under the top manifold is a black plastic box where sensors and vacc hoses plug into.. and different to the 93 that has metal piping for Vacc hoses.
Has anyone on this site single turbo'd a Series 7 FD? And if so do you have any tips.
I want to be able to do the set up etc by myself and leave the fitting of the microtech to the pros.. i was quoted 3k to fit the turbo, sort out the vacc hoses and i think its a damn rip off.
ANy help would be appreciated
Poor FD owner from NZ[COLOR=Navy]
still 1.3 liter v8 eater
Joined: Sep 2006
Posts: 546
Likes: 0
From: San Diego, CA
Originally Posted by blaze_78nz
[SIZE=6][SIZE=2]I know i have added a threat already with regards to going single on a 3rd Gen Rx7. The only problem i am facing with the threads etc is that i drive a Jap imported Series 7 Rx7.. 96 model and the vaccum hoses run off a different set up to a 93 model.
For example:
The SPAGHETTI crap under the top manifold is a black plastic box where sensors and vacc hoses plug into.. and different to the 93 that has metal piping for Vacc hoses.
Has anyone on this site single turbo'd a Series 7 FD? And if so do you have any tips.
I want to be able to do the set up etc by myself and leave the fitting of the microtech to the pros.. i was quoted 3k to fit the turbo, sort out the vacc hoses and i think its a damn rip off.
ANy help would be appreciated
Poor FD owner from NZ[COLOR=Navy]
For example:
The SPAGHETTI crap under the top manifold is a black plastic box where sensors and vacc hoses plug into.. and different to the 93 that has metal piping for Vacc hoses.
Has anyone on this site single turbo'd a Series 7 FD? And if so do you have any tips.
I want to be able to do the set up etc by myself and leave the fitting of the microtech to the pros.. i was quoted 3k to fit the turbo, sort out the vacc hoses and i think its a damn rip off.
ANy help would be appreciated
Poor FD owner from NZ[COLOR=Navy]
Thread Starter
Junior Member
Joined: May 2006
Posts: 13
Likes: 0
From: NEW ZEALAND
yeah 3k just for the tuning and ECU install. Anyways i have taken out all the vacc hoses bar a couple lm not sure of and will post pics of what i am unsure about. Any one with detail pics of Single turbo conversion?
Senior Member
Joined: Nov 2001
Posts: 567
Likes: 0
From: Malaysia
http://www.negative-camber.org/crispyrx7/gt35rpage1.htm
detailed step by step procedure. helped me heaps when o was doing the same.
detailed step by step procedure. helped me heaps when o was doing the same.
