hi--

I need some help:
I have a goal to make my gen3 rx-7 to be longlasting and strong so I dont need to pull out my engien so ofen.
There soon be a street track out here were I live so it will be used on a track just for fun some times.
I was thinking about a turbo kit that could produse about 400 to 450 rwhp- with a large street port and maby some more size on the exhust port.
I already have the apexi pfc the greddy intake and a hks full exshust system.
But i would have to need the some other fuel system and ect..
Can someone help me to tell what parts I need. so I could make this upgrade properly?


Ken

 

For fuel you'll want to upgrade the injectors to 850 cc/min primaries and 1600 cc/min secondaries along with a fuel pressure regulator and a supra TT (nippondenso) fuel pump or a pair of walbro's. Might be a good idea to upgrade the ignition slightly, an MSD 6A or 6AL works very nicely on the leading coil.

 

how is the greddy t-78 /g20 turbo on the fd3s,how si the power on the rpm registert? do you have drag all over or just in the high end?
and what apex is considerd good for the upgrade I am planing ?

 

Here u go, a curve on a T78 streetport 3rd gen... And it´s built n tuned in your neighboor country! https://www.rx7club.com/single-turbo-rx-7s-23/t-78-streetport-g-teched-685959/