Secondary Fuel Injector Install
#1
Junior Member
Thread Starter
Join Date: Dec 2003
Location: Virginia
Posts: 10
Likes: 0
Received 0 Likes
on
0 Posts
Secondary Fuel Injector Install
I am tryin to install the RX7.com (Rotary Performance) fuel rail kit with 1600's and ran into a problem. Do you have to remove the stock injector grommets for them to fit and seal properly or do you keep them in there? It seems that the injectors won't seal properly without the grommets. I did remove the diffusers already. Any help would greatly be appreciaated.
P.S. I did a search for this and could not find the answer.
P.S. I did a search for this and could not find the answer.
#2
Perpetual Rebuilder
I used a sliver of 5/8" hose for the seal.
I did a write up for keith's rails a while back that may help.
http://www.3rdgenrx7.com/keithshowto.htm
Shawn
I did a write up for keith's rails a while back that may help.
http://www.3rdgenrx7.com/keithshowto.htm
Shawn
Thread
Thread Starter
Forum
Replies
Last Post
trickster
2nd Generation Specific (1986-1992)
25
07-01-23 04:40 PM
82streetracer
1st Generation Specific (1979-1985)
7
08-23-15 09:28 AM