S4 OEM studs limit question
05-20-14, 08:05 PM
#1
Senior Member
Thread Starter
iTrader: (8)
Join Date: Mar 2007
Location: scranton Pa
Posts: 440
Likes: 0
Received 0 Likes
on
0 Posts
S4 OEM studs limit question
I'm trying to find more info on fc running high hp on oem stud. Reason I'm asking is when I rebuild my engine 3yrs ago, and never bought a stud kit. The engine is an s4 with a HBP and RA super seals. Since it's not my daily it still has very low miles still. And haven't drove for a year since I've been upgrading my turbo setup. The closest info I've found is from this thread and the post from RXTASY57 where he ran 30psi on OEM stud for hundreds of times Engine Studs, Heres what I see on the Mkt & What do you run?
What I want to do is run 20psi on my wbs366 I have and still getting supporting mod for it. I'm just looking for more info on the OEM stud. I know a proper tune is required for this and I do have a tuner.
Thanks for the help
What I want to do is run 20psi on my wbs366 I have and still getting supporting mod for it. I'm just looking for more info on the OEM stud. I know a proper tune is required for this and I do have a tuner.
Thanks for the help
05-21-14, 07:59 AM
#3
Senior Member
Thread Starter
iTrader: (8)
Join Date: Mar 2007
Location: scranton Pa
Posts: 440
Likes: 0
Received 0 Likes
on
0 Posts
didn't realized the link from the thread didn't work. https://www.rx7club.com/rotary-drag-...ou-run-964978/
Thread
Thread Starter
Forum
Replies
Last Post