Rebuilding 87 turbo
01-20-09, 02:15 PM
#1
Senior Member
Thread Starter
iTrader: (7)
Join Date: Dec 2007
Location: Illinois
Posts: 346
Likes: 0
Received 0 Likes
on
0 Posts
Rebuilding 87 turbo
I am gonna rebuild my turbo and I need help.
First where would i get a kit for this.
Can I use a t4 turbine wheel and t3 compressor wheel with this center housing and what compressor housing can I use. I am gonna port the wastegate to about 35mm.
I have 1.7rtek, 550/720 inj's, RB downpipe and planning to run 10psi of boost.
This will be my first turbo rebuild so please help.
First where would i get a kit for this.
Can I use a t4 turbine wheel and t3 compressor wheel with this center housing and what compressor housing can I use. I am gonna port the wastegate to about 35mm.
I have 1.7rtek, 550/720 inj's, RB downpipe and planning to run 10psi of boost.
This will be my first turbo rebuild so please help.
01-21-09, 10:40 AM
#2
dyno queen potentials
Join Date: Oct 2007
Location: ga
Posts: 445
Likes: 0
Received 0 Likes
on
0 Posts
you can get the kit from mazda(expensive), rotary aviation, atkins rotary. those are just a few. use stock turbo, save your money and buy a good turbo. don't waste time doing all of that stuff.
Thread
Thread Starter
Forum
Replies
Last Post