Good Day
I did a search on this topic already and only got something on the Oil pressure but it wasn't solved. Someone said 30PSI @ idle and 50-60 PSI @ WOT

I'm finishing up my FD project. Went single turbo(62-1), with 1600 sec and 850 prim. What Oil Pressure and Fuel Pressure should my car be at idle and WOT. Thank you for any advice.

Also is Castrol Syth a good oil to use in my setup

 

mine:
30PSI@Idle
60PSI@Driving
110PSI@WOT

 

Is that for both oil and fuel pressure

thank you

 

futureshock i have the same set up and its working pretty good i run 10.8 1.52 60 ft 127 trap. I have a/c power steering and cruse with full interior touring model. Fuel pressure base 42 psi, oil pressure is a bit unusual castrol 10/40 warm idle 75 psi wot 140 psi it has oil mods but it does seen high. Defi gauges.

 

what management you are running and did you dyno the car yet

 

Haltech E6K dyno tec 420 at 12 lbs steve kan tune, turned it up to 20 lbs on 93 and ran 10.8. 9.5 t11 rotors 3 mill seals dowled motor 850s and 1600s with duel walbros. Also cermet coated rotors and housings.10.5 et streets 15 psi, i also had 16 gals of gas and heavy 18's up front.

 

nah boy!

you making me feel like i left some stuff out of my engine setup

You are lucky to have a good tuner as Steve that's knows the PFC in and out

I bought a map for my PFC from rx7.com to help out my tuner. I'm sure it will be ok but would like to know that EVERYTHING was covered.