Just got my car back...
08-14-02, 12:57 AM
#1
Senior Member
Thread Starter
Join Date: Mar 2001
Location: NYC
Posts: 250
Likes: 0
Received 0 Likes
on
0 Posts
Just got my car back...
Just got my car back from KD and I'm pretty happy. It didn't produce the numbers I would've wanted but it's more then enough for the time being. I got 312rwhp at 10 psi and 379rwhp at 14psi. Dave said I would've gotten more if it was alittle cooler out. I was also hoping to break the 400 mark but I guess this gives me a little time to get used to the power and tune it for more power later. This thing just screams now and to think that it isn't even in the sweet spot yet (20 and above) I wanna post the dyno printout but I don't have a scanner, I'll see if I can do it at work. Dave is the man and I don't think I will ever take my car to anyone else. I've always left his shop happy except for the time he told me my twins were shot 
My mods:
rebuilt engine with 3mm seals
street port
Haltech E6K
Greddy T78 kit
Greddy Profec B
K2RD custom fuel rail
750/1600 injectors
RP FPR
HKS Twin Power
Apex FMIC
HKS SS BOV
Magnecor wires
Nippodenso Upgraded fuel pump
downpipe
midpipe
APex N1 Dual
ACT Street/strip clutch
9.5 lb Flywheel
My mods:
rebuilt engine with 3mm seals
street port
Haltech E6K
Greddy T78 kit
Greddy Profec B
K2RD custom fuel rail
750/1600 injectors
RP FPR
HKS Twin Power
Apex FMIC
HKS SS BOV
Magnecor wires
Nippodenso Upgraded fuel pump
downpipe
midpipe
APex N1 Dual
ACT Street/strip clutch
9.5 lb Flywheel
Last edited by al900rr; 08-14-02 at 01:15 AM.
08-14-02, 01:03 AM
#3
Senior Member
Thread Starter
Join Date: Mar 2001
Location: NYC
Posts: 250
Likes: 0
Received 0 Likes
on
0 Posts
Saw alot of nice 7's there too. Gordon's car is just plain insane. I love the brake kit and Autometer dash. I saw Koch's car there. I think I saw a 7 with the Workmeister rims that someone mentioned (your motor is out and being worked on)
Last edited by al900rr; 08-14-02 at 01:09 AM.
08-14-02, 01:12 AM
#4
Senior Member
Thread Starter
Join Date: Mar 2001
Location: NYC
Posts: 250
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by vosko
congrats mine ran today. not done but running
congrats mine ran today. not done but running
Thanks. I think you and I have the pretty much the same setup The car feels completely different with a single. I can't wait till get some race fuel and tune for higher boost levels. I'll just try to get used to 14psi right now before I kill myself
08-14-02, 12:21 PM
#5
Just Call Me Terminator!
iTrader: (4)
Join Date: Feb 2001
Location: NJ
Posts: 7,848
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by al900rr
Thanks. I think you and I have the pretty much the same setup
The car feels completely different with a single. I can't wait till get some race fuel and tune for higher boost levels. I'll just try to get used to 14psi right now before I kill myself
Thanks. I think you and I have the pretty much the same setup The car feels completely different with a single. I can't wait till get some race fuel and tune for higher boost levels. I'll just try to get used to 14psi right now before I kill myself
i'm organize a meet real soon. i want to see how many single turbo fd's we have in the tristate area now. probably almost as many as we have stock twin turbo LOL
08-14-02, 07:52 PM
#7
Senior Member
Thread Starter
Join Date: Mar 2001
Location: NYC
Posts: 250
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by gmonsen
al900rr (what's your name, btw?): congratulations! that was your car i saw when i was there. looks great and i think you're goining to love the T78. also (and this isn't ball-breaking), 380 rwhp on a newer install at 14 psi is PHENOMENAL! quit complaining. what the heck were you looking for at 14 psi? you got almost 400 rwhp at an insanely low boost level. the T78 is happiest at 20+ psi. what do you think you're running there? how about 500+ rwhp? personally, i think your numbers are great. if you want to fax me a copy of your dyno, i'll scan and email it to you so you can post it. great numbers. lots of power at low boost. -gordon
al900rr (what's your name, btw?): congratulations! that was your car i saw when i was there. looks great and i think you're goining to love the T78. also (and this isn't ball-breaking), 380 rwhp on a newer install at 14 psi is PHENOMENAL! quit complaining. what the heck were you looking for at 14 psi? you got almost 400 rwhp at an insanely low boost level. the T78 is happiest at 20+ psi. what do you think you're running there? how about 500+ rwhp? personally, i think your numbers are great. if you want to fax me a copy of your dyno, i'll scan and email it to you so you can post it. great numbers. lots of power at low boost. -gordon
I guess you're right. I was hoping to break 400rwhp but I didn't take into account the ambient temps. I'm sure I would've gotten those numbers on a cooler day. Dave told me it was pretty hot in there and he had to shut down a couple of times cause of high intake temps. Dave is the f*ckin man. Email me your fax. AL900RR@aol.comThe low end is pretty much non-existent but when the rpms climb.... eek:
Last edited by al900rr; 08-14-02 at 08:19 PM.
Trending Topics
08-14-02, 08:48 PM
#8
Full Member
Join Date: Mar 2001
Location: Never Never Land, Rotary Fun.
Posts: 222
Likes: 0
Received 0 Likes
on
0 Posts
hey
that was my car with the work rims..
he's supposed to be done with mine by friday.. *shrug* who knows if it will.. I'm getting a T04R put in, so we'll see how mine puts up to yours
nice car though, yours
that was my car with the work rims..
he's supposed to be done with mine by friday.. *shrug* who knows if it will.. I'm getting a T04R put in, so we'll see how mine puts up to yours
nice car though, yours
08-15-02, 01:03 AM
#9
Senior Member
Thread Starter
Join Date: Mar 2001
Location: NYC
Posts: 250
Likes: 0
Received 0 Likes
on
0 Posts
Thanks Reckless.
WorkS2R :I was gonna go T04R too but XS was in the process of moving then and didn't have any in stock so I went T78. I might consider picking one up cause the lag on the 78 is unbearable.
WorkS2R :I was gonna go T04R too but XS was in the process of moving then and didn't have any in stock so I went T78. I might consider picking one up cause the lag on the 78 is unbearable.
08-15-02, 04:18 PM
#12
Originally posted by al900rr
Andy I guess you're right. I was hoping to break 400rwhp but I didn't take into account the ambient temps. I'm sure I would've gotten those numbers on a cooler day. Dave told me it was pretty hot in there and he had to shut down a couple of times cause of high intake temps. Dave is the f*ckin man. Email me your fax. AL900RR@aol.com
The low end is pretty much non-existent but when the rpms climb.... eek: [/B]
Andy
I guess you're right. I was hoping to break 400rwhp but I didn't take into account the ambient temps. I'm sure I would've gotten those numbers on a cooler day. Dave told me it was pretty hot in there and he had to shut down a couple of times cause of high intake temps. Dave is the f*ckin man. Email me your fax. AL900RR@aol.comThe low end is pretty much non-existent but when the rpms climb.... eek:
[/B]
Ken
08-15-02, 10:22 PM
#16
Senior Member
Thread Starter
Join Date: Mar 2001
Location: NYC
Posts: 250
Likes: 0
Received 0 Likes
on
0 Posts
Luv94RX7: I'm going tomorrow, which car is it so I know what to look for?
Glassman: the T78 is really laggy compared to the stock twins which was what I had b4 but when the boost comes on, it comes on super strong. I'm also at relatively low boost too (14PSI)
Glassman: the T78 is really laggy compared to the stock twins which was what I had b4 but when the boost comes on, it comes on super strong. I'm also at relatively low boost too (14PSI)
08-16-02, 09:19 PM
#21
Senior Member
Thread Starter
Join Date: Mar 2001
Location: NYC
Posts: 250
Likes: 0
Received 0 Likes
on
0 Posts
WORKS2R: I only saw the motor out and that was it. VR with the Workmeister rims and I think Feed Strut bar. Nice car. I just got back from Dave today for my idle issue and he fixed it in 5 minutes. Idle is rock solid now.
Gmonsen: faxing first thing tomorrow morning when I get to work. Was that your car with the AP brakes?
Gmonsen: faxing first thing tomorrow morning when I get to work. Was that your car with the AP brakes?
