Interest in getting a used GT 35/40 setup
02-21-06, 11:38 AM
#1
No it's not Turbo'd
Thread Starter
Interest in getting a used GT 35/40 setup
This is A-Spec's GT35/40 Kit....
The setup I'm talking about is a GT 35/40 with Apex Seal Impact Damage....
The way I'd sell it is with eveything together like I bought it.
Including Injectors, wategate etc... basically everything you see with the turbine chewed up... so a new turbine, or a Center Shaft Turbine and Compressor would be needed...
I would most likely give the buyer a shot at the Excessive Motorsports Lower Intake Manifold free of all smog equiment, with equal legnth runners, supposedly lestens the chances of the rear rotor getting a leaner mixture and detonating...
Q: What happened? I belive it to be a bad tank of gas, I tried to do everything right including having Steve K come out and tune, and it still blew up due to bad gas...
This is the "Shape" the hot side is in....
BTW there is a Profec-B to be had as well.....
The setup I'm talking about is a GT 35/40 with Apex Seal Impact Damage....
The way I'd sell it is with eveything together like I bought it.
Including Injectors, wategate etc... basically everything you see with the turbine chewed up... so a new turbine, or a Center Shaft Turbine and Compressor would be needed...
I would most likely give the buyer a shot at the Excessive Motorsports Lower Intake Manifold free of all smog equiment, with equal legnth runners, supposedly lestens the chances of the rear rotor getting a leaner mixture and detonating...
Q: What happened? I belive it to be a bad tank of gas, I tried to do everything right including having Steve K come out and tune, and it still blew up due to bad gas...
This is the "Shape" the hot side is in....
BTW there is a Profec-B to be had as well.....
Last edited by DCrosby; 02-21-06 at 11:43 AM.
Thread
Thread Starter
Forum
Replies
Last Post
Jeff20B
1st Generation Specific (1979-1985)
73
09-16-18 07:16 PM